DFD6361-Maintenance - 第236页

C-24 Procedur es for ax is operation c heck (Co ntinued) Step No. Do This 6 After completion of operational checkout, press the <EXIT> button. - The system then returns to t he ENGINEERING MAINTENANCE screen [ scre…

100%1 / 720
C-23
Procedures for axis operation check (Continued)
Step No. Do This
1
From the ENGINEERING MAINTENANCE screen [screen 7.0],
press the <F2> button.
- The AXIS OPERATION screen then appears.
2
With numeric buttons enter the scan speed [2] and index amount
[3] for the axis to be subjected to operational checkout, and then
press the <ENTER> button.
- The data setup is then finalized.
3
Select the axis to be checked.
4
When performing axis operation checks with the splash cover or
arm section cover open, proceed as follows.
1) Obtain the maintenance key, which is stored under
maintenance personnel control, and insert it into the
maintenance switch.
2) Rotate the maintenance key clockwise and placed in the
OVERRIDE position.
3) While pressing the override button, open the splash cover or
arm section cover.
5
Using function buttons (F2 ∼ F10), perform operational checks.
C-24
Procedures for axis operation check (Continued)
Step No. Do This
6
After completion of operational checkout, press the <EXIT>
button.
- The system then returns to the ENGINEERING
MAINTENANCE screen [screen 7.0].
7
Close the splash cover or arm section cover.
8
Press the <System Initial> button to effect system initialization.
9
Remove the key from the maintenance switch.
10
Have it stored by the maintenance personnel.
C-25
AXIS OPERATION screen
The description of AXIS OPERATION screen is as follows:
This screen is called up by pressing the <F2> button from ENGINEERING
MAINTENANCE screen [screen 7.0].
[Screen]
[1]
[2] [3] [4]
[Setting Item]
Item No. Descriptions
[1]
Select the unit of measure (inch or millimeter).
[2]
Enter the axis scan speed for the operation check of each axis.
[3]
Enter the axis index amount for the operation check of each axis.
[4]
Indicates the current position of each axis in the axis operation
check process.