DFD6361-Maintenance - 第298页
D-13 2-1. Error Code Classificat ion Error code classi fication The error codes are cl assified as fol lows. Error Co de Error T ype E**** Errors requiring an emergenc y stop B**** Blade/setup related erro rs V**** Valve…
D-12
2. Remedies for Problems Invoking Error Code
Indication
Summary of this section
If any incorrect operation is performed or a machine failure occurs, the
machine displays an error code and a brief message on screen.
This section describes the classification of error codes, error list and remedies
for errors.
Section No. Title Contents
2-1 Error Code Classification - Error code classification by their
first letter
-Errordisplay
2-2 Error Code List - List of error codes and messages
2-3 Remedies for Errors
Requiring Emergent Stop
2-4 Remedies for Blade/Setup
Related Errors
2-5 Remedies for Valve-
Related Errors
2-6 Remedies for Alignment-
Related Errors
2-7 Remedies for Kerf Check-
Related Errors
2-8 Remedies for Axis-
Related Errors
2-9 Remedies for Other
Errors
- What was detected
- During what operation the error
occurred
- State after detection
- What to do
- Recovery
D-13
2-1. Error Code Classification
Error code classification
The error codes are classified as follows.
Error Code Error Type
E**** Errors requiring an emergency stop
B**** Blade/setup related errors
V**** Valve related errors
A**** Automatic alignment related errors
K**** Kerf check related errors
X****
Errors relating X-/Y-/Z-/θ-axis and axis of
transport section
O**** Other errors
On-screen error indication position
Whenever an error occurs, the monitor displays its error code and message at
the following position.
[1] [2]
[1]: Shows an error code.
[2]: Shows an error message.
D-14
2-2. Error Code List
Error with a code beginning with "E"
The error with a code beginning with the letter E requires an emergent stop of
the machine.
Please refer to the section 2-3, [Remedies for Errors Requiring Emergent Stop]
regarding the way to handle the error.
Error Code Message
E0002 EM switch pressed.
E0003 Insufficient main air ... Reinitialize.
E0007 UPS has been actuated.
E0008 Z EM is activated.
E0012 Splash cover opened.
E0014 Temperature in the electrical box has increased.
E0015 Water case overflow error.
E0016 Drain tank overflow error.
E0019 Insufficient N
2
(clean air) pressure.
E0020 Handling cover sensor error.
E0175 Process program error. Re-initialize system.
E0176 Cover open error.
E0190 Water leakage detected. (X-axis)
E0556 Z1-axis spindle cooling water flow error.
E0557 Z2-axis spindle cooling water flow error.
E0558 Z1-axis spindle inverter error. Re-start the machine.
E0559 Z2-axis spindle inverter error. Re-start the machine.
E0576 Pressure of water dropped.
E0665 Water leakage detected. (Spinner)
E0706 Z1 cut water flow(BLD F) lower limit
E0707 Z2 cut water flow(BLD F) lower limit
E0712 Z1 cut water flow (SHW) lower limit
E0713 Z2 cut water flow (SHW) lower limit
E0715 Z1 cut water flow (SP) lower limit
E0716 Z2 cut water flow (SP) lower limit
E1027 Cassette position error (Placement)
E1032 Inspection cover sensor error.
E1033
Water leakage detected. (θ-axis)