DFD6361-Maintenance - 第39页

A-23 2-7. Elevator Section Elevator section co mponent n ames The elevator section consists of the following components. Linear guid e Ball-be aring leadsc rew FRONT AC servom otor Cassett e stage Elevator section m echa…

A-22

Spinner section mechanism (Continued)

Spinner table Various types of tables corresponding to the following

DISCO frames are available. Replace them according to

the frame to be used.

[DFD6351]

For DTF2-8-1

For DTF2-6-1

For DTF2-6

For DTF2-5-1

[DFD6361]

For DTF2-12

For DTF2-8-1

A-23

2-7. Elevator Section

Elevator section component names

The elevator section consists of the following components.

Linear guide

Ball-bearing leadscrew

FRONT

AC servomotor

Cassette stage

Elevator section mechanism

The elevator section is structured as follows:

Driving source An AC servomotor and ball-bearing leadscrew

combination moves the cassette stage up and down.

Workpieces in the cassette are loaded or unloaded by

the push-pull arm.

A-24

Cassette stage

[Standard specification cassette]

On the cassette stage, there are the cassette blocks which prevent the cassette

from moving off the setting position.

Each cassette block corresponds to different cassette type.

The illustration below shows the relationship between the cassette blocks and

cassette types.

2-6-1 cassette

2-8 cassette

2-6 cassette

2-5-1 cassette

Cassette stage top surface

2-8 cassette

300 mm 13slot standard cassette

[DFD6351] [DFD6361]