DFD6361-Maintenance - 第391页

D-106 2-6. Remedie s for Alignment-Related Errors A0531 : N ot foun d macr o targ et. Error c ode A0531 Message Not found macro tar get. W hat wa s detected Error di splay is m ade if th e teach- entered patte rn was n o…

100%1 / 720
D-105
V1245 : Can't Open Wheel Cover (Z2).
Error code
V1245
Message
Can't Open Wheel Cover (Z2).
What was
detected
The wheel cover opening/closing sensor detects that the wheel cover
does not open.
During what
operation it
occurred
At the following timings when the wheel cover should open.
- When BLADE REPLACEMENT screen [screen 4.1] is called up.
- When the [Wheel Cover] (opening/closing) button is pressed on
BLADE BREAKAGE DETECTOR ADJUSTMENT screen [screen
4.2].
- When FLANGE DRESSING screen [screen 7.1] is called up.
- When executing setup operation.
State after
detection
The current full automation operation is suspended.
Phenomenon Probable causes Remedy
Refer-
ence
What to do
The wheel cover
does not open.
The amount of air supply
is insufficient.
Supply air.
The wrong position or
malfunction of the
nozzle.
Contact your
nearest DISCO
Service Office.
When no reaction occurs
against pressing buttons,
thetouchpanelmaybe
faulty.
Contact your
nearest DISCO
Service Office.
The error occurs
even when the
wheel cover is
open.
The wrong position or
malfunction of the wheel
cover opening/closing
sensor.
Contact your
nearest DISCO
Service Office.
The wheel cover
cylinder does not
work.
The cylinder is broken or
blocked.
Contact your
nearest DISCO
Service Office.
Recovery
(1) Cancel the alarm.
(2) Resume operation from the halted screen.
Maintenance level Maintenance personnel level Hazard level
Measuring
equipment used
Tools Replacement parts
Measuring
equipment used
D-106
2-6. Remedies for Alignment-Related Errors
A0531 : Not found macro target.
Error code
A0531
Message
Not found macro target.
What was
detected
Error display is made if the teach-entered pattern was not found on the
workpiece in the macro search operation of auto alignment.
During what
operation it
occurred
During auto alignment operation.
State after
detection
Auto alignment operation is temporarily halted.
Phenomenon Probable causes Remedy Reference
What to do
The error occurs
frequently.
Thedevicedata
setting for doing the
operation is
incorrect.
Change the device
data.
The variation on the
workpiece front side
is large.
Contact your sales
representative at
the nearest DISCO
Service Office.
Thereisalarge
variationinthe
attachment angle of
the workpieces with
respect to the frame.
Reattach the
workpiece, with the
attachment
precision of 5° or
less.
Recovery
(1) Cancel the alarm, and then the ERROR RECOVERY (ALIGNMENT)
screen is displayed.
(2) Perform the error recovery steps indicated on the screen.
Maintenance level Maintenance personnel level Hazard level
Measuring equipment used Tools Replacement parts Protective gear
D-107
A0532 : Not found micro target.
Error code
A0532
Message
Not found micro target.
What was
detected
Error display is made if the teach-entered pattern was not found on the
workpiece in the micro search operation of auto alignment.
During what
operation it
occurred
During auto alignment operation.
State after
detection
Auto alignment operation is temporarily halted.
Phenomenon Probable causes Remedy Reference
What to do
The error occurs
frequently.
Thedevicedata
setting for doing the
operation is
incorrect.
Change the device
data.
The variation on the
workpiece front side
is large.
Contact your sales
representative at
the nearest DISCO
Service Office.
The micro target is
improper.
Conduct teaching
again.
The rotation axis is
not in alignment.
Effect rotation axis
alignment.
Recovery
(1) Cancel the alarm, and then the ERROR RECOVERY (ALIGNMENT)
screen is displayed.
(2) Perform the error recovery steps indicated on the screen.
Maintenance level Maintenance personnel level Hazard level
Measuring equipment used Tools Replacement parts Protective gear