DFD6361-Maintenance - 第439页
E-3 1. Maintenance Whose Interval Differs Depending on the Machine Use Conditions of the Device Summary of this sectio n This section describes m aintenance whose service interval differs dependin g on the machine usage …
E-2
Contents of this chapter (Continued)
Section
No.
Title Contents
Wheel mount conditioning
Greasing the elevator axis
Greasing the frame centering axis
5
Maintenance to Be Performed at
183-Day Intervals
(Recommended)
Cleaning the spindle coolant water
path
Cleaning the vacuum ejector
Greasing the X-axis
Greasing the push-pull axis
Greasing the upper arm axis
Greasing the lower arm axis
Greasing the θ-axis sensor assembly
section
Greasing the Y (Y1 and Y2) -axis
6
Maintenance to Be Performed at
365-Day Intervals
(Recommended)
Greasing the Z (Z1 and Z2) -axis
E-3
1. Maintenance Whose Interval Differs
Depending on the Machine Use Conditions of
the Device
Summary of this section
This section describes maintenance whose service interval differs depending
on the machine usage conditions.
Section No. Title Contents
1-1 Cleaning the Non-Contact
Setup Sensor (Detection
Surface)
[Optional Accessory]
- Procedures for cleaning the non-
contact setup sensor
1-2 Cleaning the Blade
Breakage Detector Sensor
- Procedures for cleaning the
blade breakage detector sensor
1-3 Cleaning the spindle - Procedures for cleaning the
spindle
1-4 Cleaning the touch panel - Procedures for cleaning the
touch panel
E-4
1-1. Cleaning the Non-Contact Setup Sensor
(Detection Surface) [Optional Accessory]
Operation flow
The procedure for cleaning the non-contact setup sensor (detection surface)
consists of the following steps.
1-1-1 Calling up the NCS SENSOR CLEANING screen [screen 4.8]
1-1-2 Cleaning the non-contact setup sensor
1-1-3 Cleaning the non-contact setup sensor with abrasives
[Optional accessory]
1-1-4 Adjusting the non-contact setup amplifier
1-1-5 Completion of cleaning the non-contact setup sensor