DFD6361-Maintenance - 第492页
E-56 Procedur es for prep aration of gr easing the el evator axis (Continue d) Step No. Do This 6 Remove the covers [B] and [ C]. Then store them sufficientl y away from the working area. - For the cover removal procedur…
E-55
5-2-1. Preparation of greasing the elevator axis
Procedures for preparation of greasing the elevator axis
Step No. Do This
1
If there is a cassette on the cassette stage, remove it.
2
On the AXIAL OPERATION screen [screen 7.2], change the
position of the elevator axis to "300mm".
For the AXIS OPERATION screen [screen 7.2];
- See the section C-3, [Axis Operation Check].
3
Turn OFF the main switch and remove the key.
4
Turn OFF the circuit breaker on the left of the machine, and then
lock out the circuit breaker lever with a padlock or the like.
5
Shut off the facility power supply.
E-56
Procedures for preparation of greasing the elevator axis (Continued)
Step No. Do This
6
Remove the covers [B] and [C]. Then store them sufficiently
away from the working area.
- For the cover removal procedures;
See the section B-2-2, [Removing the Machine Outer Cover
and Status Indicator] of Installation Manual.
[B]
[C]
Continued in the next section.
E-57
5-2-2. Greasing the elevator axis
Procedures for greasing the elevator axis
WARNING
When you perform the procedure set forth in this section, you have to
place your hands in a drive section. If you perform maintenance with
the power ON, your fingers or hands may be caught or cut off.
Turn OFF the machine and shut off the facility power supply before
starting this procedure.
Also, ensure that no other person touches the machine during
lubricating.
Procedures for greasing the elevator axis
Step No. Do This
(Continued from the previous section)
1
Remove the retaining screws of the elevator axis cover.
Elevator axis cover
Retaining screws (Cross-shape recess screws)
Retaining screws (M4)