DFD6361-Maintenance - 第497页

E-61 Before g reasing Have on hand the following tools before starting greasin g. For the MSDS; See the section G-2, [Mater ial Safe t y Data Sheet (MSDS) ]. Grease Name AFC gre ase Maker THK Part No. MOELJ007 Grease gun…

E-60

5-3. Greasing the Frame Centering Axis

Operation flow

The procedure for greasing the frame centering axis consists of the following

steps.

5-3-1 Preparation of greasing the frame centering axis

5-3-2 Greasing the linear guide

5-3-3 Completion of greasing the frame centering axis

Safety items for greasing the frame centering axis

WARNING

If any touch panel control is inadvertently activated during

maintenance or inspection, unexpected machine operation may

cause death or serious injury.

While you don't use the touch panel, press the Disco's logo button

located at the upper left of the screen in order to lock up and

deactivate the touch panel.

CAUTION

When you perform maintenance with the outer cover removed,

observe the following precaution. If you stand the removed outer

cover against the machine, you may receive injury by the cover if it is

toppled by the earthquake or like that.

After taking off the outer cover for maintenance purposes, store it

sufficiently away from the working area.

NOTICE

Neither safety goggles, protective gloves, stepstools, flashlights nor

alcohol, all of which are necessary for maintenance work, are not

supplied with the machine. Use what are furnished in your factory or

what comply with your factory's standards.

E-61

Before greasing

Have on hand the following tools before starting greasing.

For the MSDS;

See the section G-2, [Material Safety Data Sheet (MSDS)].

Grease Name AFC grease

Maker THK

Part No. MOELJ007

Grease gun unit Name MG-70

Maker THK

Part No. MOELJ006

Lint-free waste

Spatula (resin)

Flashlight

Protective gloves

Phillips screwdriver

E-62

5-3-1. Preparation of greasing the frame centering axis

Procedures for preparation of greasing the frame centering axis

WARNING

When you perform the procedure set forth in this section, you have to

place your hands in a drive section. If you perform maintenance with

the power ON, your fingers or hands may be caught or cut off.

Turn OFF the machine and shut off the facility power supply before

starting this procedure.

Also, ensure that no other person touches the machine during

lubricating.

Step No. Do This

Press the <System Initial> button to effect system initialization.

With the button, move the X-axis to the left.

If there is a cassette on the cassette stage, remove it.