DFD6361-Maintenance - 第498页
E-62 5-3-1. Prep aration of greasi ng the frame centering axis Procedur es for pr eparation of g reasing th e frame center ing ax is W ARNING W hen you per form the procedure set forth in this section, y ou have to place…
E-61
Before greasing
Have on hand the following tools before starting greasing.
For the MSDS;
See the section G-2, [Material Safety Data Sheet (MSDS)].
Grease Name AFC grease
Maker THK
Part No. MOELJ007
Grease gun unit Name MG-70
Maker THK
Part No. MOELJ006
Lint-free waste
Spatula (resin)
Flashlight
Protective gloves
Phillips screwdriver
E-62
5-3-1. Preparation of greasing the frame centering axis
Procedures for preparation of greasing the frame centering axis
WARNING
When you perform the procedure set forth in this section, you have to
place your hands in a drive section. If you perform maintenance with
the power ON, your fingers or hands may be caught or cut off.
Turn OFF the machine and shut off the facility power supply before
starting this procedure.
Also, ensure that no other person touches the machine during
lubricating.
Step No. Do This
1
Press the <System Initial> button to effect system initialization.
2
With the button, move the X-axis to the left.
3
If there is a cassette on the cassette stage, remove it.
E-63
Procedures for preparation of greasing the frame centering axis (Continued)
Step No. Do This
4
From the ENGINEERING MAINTENANCE screen [screen 7.0],
press the <F2> button.
- The AXIS OPERATION screen then appears.
- For the AXIS OPERATION screen
See the section C-3, [Axis Operation Check].
5
Move the push-pull arm to the rearward.
6
Turn OFF the main switch and remove the key.
7
Turn OFF the circuit breaker on the left of the machine. Lock out
the circuit breaker lever with a padlock or the like.
8
Shut off the facility power supply.
Continued in the next section.