DFD6361-Maintenance - 第502页

E-66 5-3-3. Com pletion of greasi ng the f rame centering axis Procedur es for c ompleti on of gr easing the f rame c enteri ng axi s Step No. Do This (Continued from the previous section) 1 Turn ON the facility power so…

E-65

Procedures for greasing the linear guide (Continued)

Step No. Do This

With a lint-free cloth, wipe off the dirty grease on the rail of the

front linear guide.

Rail

With a spatula, apply grease to the rail.

Close the front arm section cover.

Reinstall the frame centering axis cover to its original position.

Continued in the next section.

E-66

5-3-3. Completion of greasing the frame centering axis

Procedures for completion of greasing the frame centering axis

Step No. Do This

(Continued from the previous section)

Turn ON the facility power source.

Open the circuit breaker lever lockout and then turn ON the

circuit breaker.

Insert the key into the main switch and then turn ON the main

switch.

Press the <System Initial> button to effect system initialization.

On the AXIS OPERATION screen, shuttle the frame centering

axis between the left and right end at least three times to apply

the grease uniformly to the entire axis.

E-67

5-4. Cleaning the Spindle Coolant Water Path

Operation flow

The procedure for cleaning the spindle coolant water path consists of the

following steps.

5-4-1 Preparation of cleaning the spindle 1 coolant water path

5-4-2 Cleaning the spindle 1 coolant water path

5-4-3 Completion of cleaning the spindle 1 coolant water path

5-4-4 Preparation of cleaning the spindle 2 coolant water path

5-4-5 Cleaning the spindle 2 coolant water path

5-4-6 Completion of cleaning the spindle 2 coolant water path