DFD6361-Maintenance - 第520页

E-84 Procedur es for cl eanin g the rig ht-hand X -axi s and its p eriphery (Conti nued) Step No. Do This 2 Remove the r i ght-ha nd bellows. - For the removal proced ure of bellows ; See the section F-3-1, [ Replacement…

100%1 / 720
E-83
6-2-2. Cleaning the right-hand X-axis and its periphery
Procedures for cleaning the right-hand X-axis and its periphery
CAUTION
When you perform maintenance with the outer cover removed,
observe the following precaution. If you stand the removed outer
cover against the machine, you may receive injury by the cover if it is
toppled by the earthquake or like that.
After taking off the outer cover for maintenance purposes, store it
sufficiently away from the working area.
Step No. Do This
(Continued from the previous section)
1
Remove the cover [D]. Then store it sufficiently away from the
working area.
- For the cover removal procedure;
See the section B-2-2, [Removing the Machine Outer Cover and
Status Indicator] of the Installation Manual.
[D]
RIGHT SIDE
E-84
Procedures for cleaning the right-hand X-axis and its periphery (Continued)
Step No. Do This
2
Remove the right-hand bellows.
- For the removal procedure of bellows;
See the section F-3-1, [Replacement of Bellows].
3
With a lint-free cloth, wipe off any soiled grease on the rails and
ball-bearing leadscrew of the right-hand X-axis linear guide
section.
Rail
Ball-bearing leadscrew
Machine front
4
With a lint-free cloth, wipe off contamination adhered to the
periphery of the X-axis.
5
Reinstall the right-hand bellows in its original position..
6
Close the front arm section cover.
7
Reinstall the cover [D].
Continued in the next section.
E-85
6-2-3. Cleaning the left-hand X-axis and its periphery
Procedures for cleaning the left-hand X-axis and its periphery
CAUTION
When you perform maintenance with the outer cover removed,
observe the following precaution. If you stand the removed outer
cover against the machine, you may receive injury by the cover if it is
toppled by the earthquake or like that.
After taking off the outer cover for maintenance purposes, store it
sufficiently away from the working area.
Step No. Do This
(Continued from the previous section)
1
Remove the covers [H] and [I]. Then store them sufficiently
away from the working area.
- For the cover removal procedure;
See the section B-2-2, [Removing the Machine Outer Cover and
Status Indicator] of the Installation Manual.
ÿ
[H]
[I]
LEFT SIDE