DFD6361-Maintenance - 第53页
A-37 Installation diagram of hub mo unt/flange Insert the hub mount or flange into the taper secti on at the edge of the spindle axis . [1.2k W spindle hu b mount] Hub mount Hub Lock nut Lock bolt [Flange of 1.2 k W spin…
A-36
Spindle piping
The spindle is water-cooled.
At the rear end of the spindle, there are joints for intake and exhaust of air and
spindle coolant water.
[1.2 kW spindle] (Common between Z1- and Z2-axis)
ÿ
Spindle coolant water outlet
Air inlet
Air outlet
Spindle coolant water inlet
A-37
Installation diagram of hub mount/flange
Insert the hub mount or flange into the taper section at the edge of the spindle
axis.
[1.2kW spindle hub mount]
Hub mount
Hub Lock nut
Lock bolt
[Flange of 1.2 kW spindle flange (Washer type)]
Flange A
Flange B
Flange B lock nut
Lock bolt
A-38
3. Main Body Section
Main body section component names
The main body section consists of the main body frame, main body base,
electrical system section, computer, drain port, duct port and utility connection
section.
Part Features
Base section
Main body frame
Serves as the base for the main mechanism.
Provided with the mounts for level adjustment and
casters.
Electrical system
section
Contains the motor driver and controller. The electrical
system section can be easily pulled out because it is of a
slide type.
Computer Controls a man-machine interface. The computer can be
easily pulled out because it is of a slide type.
Drain port Collects drainage of the wheel and spindle coolant
water, and then discharges them out of the machine.
Duct port Collects exhaust air from the cutting chamber and
spinner section, and then discharges them out of the
machine.
Utility connection
section
Various solenoid valves are systematically arranged in
this section.
This section is equipped with inlets for water and air.