DFD6361-Maintenance - 第585页
F-15 Procedur es for replaci ng the halogen lamp ( Continued) Step No. Do This 6 Replace the h alogen lam p with a new one. Part Na me Part No . Haloge n l amp AQLM-EB50 7 Reinstall the halogen lamp. 8 Close the lamp rep…
F-14
1-2-2. Replacing the halogen lamp
Procedures for replacing the halogen lamp
Step No. Do This
(Continued from the previous section.)
1
Remove the retaining screw (the cross-shaped recess screw) of
the lamp replacement window of the light source box.
Retaining screw
2
Open the lamp replacement window.
Machine front
Lamp replacement window
3
Move the lever to the right.
- The halogen lamp comes out toward you.
Lamp protrusion part
Halogen lamp
Holder dent
Lamp holder
Socket
Lever
4
Pull out the halogen lamp from the lamp holder.
5
Disconnect the halogen lamp from the socket.
F-15
Procedures for replacing the halogen lamp (Continued)
Step No. Do This
6
Replace the halogen lamp with a new one.
Part Name Part No.
Halogen lamp AQLM-EB50
7
Reinstall the halogen lamp.
8
Close the lamp replacement window.
9
Close the microscope light source box storage cover.
10
Close the arm section cover.
11
Turn ON the facility power source.
12
Open the circuit breaker lever lockout and then turn ON the
circuit breaker.
13
Insert the key into the main switch and then turn ON the main
switch.
F-16
1-3. Replacing the Microscope LED Light
About replacement of the microscope LED light
Replacement of the microscope LED light must be carried out by Disco
Service engineers.
When it becomes necessary to replace the microscope LED light, contact your
nearest Disco Service office.