DFD6361-Maintenance - 第619页
F-49 Procedur es for replaci ng the Y-axi s section rol l cover ( Continued) Step No. Do This 5 [ W hen t here is m aintenance sp ace prov ided at the r ear side of the m achine] From the r ear side of the machi ne, loos…
F-48
1-8-2. Replacing the Y-axis section roll cover
Procedures for replacing the Y-axis section roll cover
Step No. Do This
(Continued from the previous section.)
1
Open the splash cover.
2
Loose four retaining screws (M3) of the roll cover at the center of
the Y-axis section. Do not remove them.
Retaining screws (M3)
Roll cover
3
Replace the roll cover with the new one.
- You can mount the center roll cover in any direction.
Name Part No.
Sheet bellows MOKFY016
4
Firmly screw down four retaining screws (M3).
F-49
Procedures for replacing the Y-axis section roll cover (Continued)
Step No. Do This
5 [When there is maintenance space provided at the rear
side of the machine]
From the rear side of the machine, loosen four retaining screws
(M3) of the roll cover at the spindle 1 axis tail section. Do not
remove them.
Retaining screws (M3)
[When there is no maintenance space provided at the rear
side of the machine]
From the left side of the machine, loosen four retaining screws
(M3) of the roll cover at the spindle 1 axis tail section. Do not
remove them.
Retaining screws (M3)
F-50
Procedures for replacing the Y-axis section roll cover (Continued)
Step No. Do This
6
Replace the roll cover with the new one.
- Mount the roll cover in the direction as shown below.
Machine front
7
Firmly screw down four retaining screws (M3).
8
From the front side of the machine, loosen four retaining screws
(M3) of the roll cover at the spindle 2 axis tail section. Do not
remove them.
Retaining screws (M3)
9
Replace the roll cover with the new one.
- Mount the roll cover in the direction as shown below.
Machine Front
10
Firmly screw down four retaining screws (M3).
Continued in the next section.