DFD6361-Maintenance - 第682页

F-112 5-2-2. Re placing t he fluoresce nt lamp Procedur es for replaci ng the fluorescent lam p Step No. Do This (Continued from the previous section) 1 Rotate and remove t he fluorescent lam p. Remo ving the flu orescen…

100%1 / 720
F-111
Procedures for preparation of replacing the fluorescent lamp (Continued)
Step No.
Do This
6
Remove the retaining screws (cross-shaped recess screws) of the
cover.
Cover
Retaining screws (Cross-shaped recess screws)
7
Remove the cover. Then store it sufficiently away from the
working area.
Continued in the next section.
F-112
5-2-2. Replacing the fluorescent lamp
Procedures for replacing the fluorescent lamp
Step No.
Do This
(Continued from the previous section)
1
Rotate and remove the fluorescent lamp.
Removing the fluorescent lamp
Lamp sockets
Part Name Qty. Part No.
Fluorescent lamp 1 AQFHF16EX-N
2
Replace the fluorescent lamp with a new one.
Continued in the next section.
F-113
5-2-3. Completion of replacing the fluorescent lamp
Procedures for completion of replacing the fluorescent lamp
Step No.
Do This
(Continued from the previous section)
1
Reinstall the cover in its original position.
2
Reinstall the covers [S] and [U].
- For the cover installation procedure;
See the section B-1-6, [Mounting Machine Outer Covers] of
Installation Manual.
3
Turn ON the facility power source.
4
Open the circuit breaker lever lockout and then turn ON the circuit
breaker.
5
Insert the key into the main switch and then turn ON the main
switch.
6
Press the light-up switch and check whether the fluorescent lamp
properly illuminates.
ÿ
Light-up switch