00900330-01_UM_ASM-ProcessLens_EN - 第29页
2 Safety 2.2 Warning labels Instruction manual ASM ProcessLens 03/2021 29 2.2.4.9 Warning label P010 - Do Not Touch Fig.20: Do not touch label (quantity per machine: 1) Do not touch! Do not touch the optical module. See…
2 Safety
2.2 Warning labels
28 Instruction manual ASM ProcessLens 03/2021
2.2.4.5 Warning label: Emergency stop – W210
Fig.16: Emergency stop [03233439-xx]
Emergency stop
Warning label on the emergency stop button.
Quantity per machine: 1 (ASM ProcessLens Single-Lane)
Quantity per machine: 2 (ASM ProcessLens Dual-Lane)
See fig. "Warning labels front view" [}20] and "Warning labels back view" [}21]
2.2.4.6 Warning label W203
Fig.17: W203 [03009342-xx] (quantity per machine: 4)
Danger of Crushing
Reaching in here can lead to injuries to the
arms and hands.
► Do not reach into the machine while it is
running.
See fig. "Warning labels front view" [}20] and "Warning labels back view" [}21]
2.2.4.7 Warning label W206
Fig.18: W206 [03009345-xx] (quantity per machine: 2)
Dangerous Voltages
The parts behind the cover are still live when
the main power switch is off.
The machine must be disconnected from the
mains before servicing it.
NAFTA region: Risk of electric shock or
burn
See fig. "Warning labels - Power supply unit and voltage distribution board" [}24]
2.2.4.8 Warning label - Hazardous Voltage
Fig.19: Hazardous Voltage [03157800 -xx] (quantity per
machine: 2)
Hazardous Voltage
Disconnect power before servicing
► The machine must disconnected from the
mains before servicing it.
See fig. "Warning labels - Power supply unit and voltage distribution board" [}24]
2 Safety
2.2 Warning labels
Instruction manual ASM ProcessLens 03/2021 29
2.2.4.9 Warning label P010 - Do Not Touch
Fig.20: Do not touch label (quantity per machine: 1)
Do not touch!
Do not touch the optical module.
See fig. "Warning labels - front view - inside - part 1" [}22]
2.2.4.10 Warning label: Hot surface – W026
Fig.21: Hot surface (HS) [03031926-xx]
Risk of burns from hot surface!
The housing of the motors may become very
hot during continuous operation and in ambient
temperature in excess of 22 °C.
► Be careful when touching the parts.
Quantity per machine: max. 7
See fig. "Warning labels - Power supply unit and voltage distribution board" [}24]
2.2.4.11 Warning label PSUC - Power Supply Unit Cover
Fig.22: Warning label for power supply unit cover [03113903-xx] (quantity per machine: 1)
See fig. "Warning labels - Power supply unit and voltage distribution board" [}24]
2.2.4.12 Warning label – Laser radiation
Fig.23: W laser class 2 [03134118-xx]
LASER RADIATION
Laser class 2
Acc. to IEC 60825-1:2014
► Do not look into beam!
See fig. "Warning labels front view" [}20]
2 Safety
2.2 Warning labels
30 Instruction manual ASM ProcessLens 03/2021
2.2.4.13 Warning label - Sensitive conveyor side
Fig.24: Warning label - Sensitive conveyor side
[03110412-xx] (quantity per machine: 2)
Sensitive conveyor side
The conveyor sides are highly sensitive and
may not be moved unless the brakes have been
released.
Moving the sides without releasing the brakes
can cause irreparable damage to the conveyor
sides.
See fig. "Warning labels – dual conveyor" [}25]
2.2.4.14 Warning label - Support pins 94 mm
Fig.25: Warning label - Support pins 94 mm
[00368570-xx] (quantity per machine: 2)
Support pins 94 mm
Risk of damage to PCBs if wrong support pins
are used.
See fig. "Warning labels – dual conveyor" [}25]
2.2.4.15 Warning label - Entanglement hazard
Fig.26: Warning labels - Entanglement hazard
[03136855-xx] (quantity per machine: 5)
Moving belt hazard
Reaching into the machine can lead to injuries
to the arms and hands from skin and clothing
contact.
► Do not reach into the machine while it is
running.
See fig. "Warning labels – dual conveyor" [}25]
2.2.4.16 Warning label - General warning/attention
Fig.27: Warning label - General warning/attention
[03079298-xx] (quantity per machine: 1)
General warning/attention
Risk of part damage if cover is removed!
See 2.2.3 "Warning lables on the conveyor" [}25]