00900330-01_UM_ASM-ProcessLens_EN - 第3页
3 Instruction manual ASM ProcessLens 03/2021 Table Of Contents Table Of Contents 1 Introduction .. 7 1.1 Machine overview .. 7 1.1.1 Machine description .. 8 1.1.2 Serial number of the machine .. 9 1.1.3 EU Decla…
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate
the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software de-
scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-
tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems Singapore Pte Ltd
535 Yishun Industrial Park A
ASM Tech-Park Building 2
Singapore 768775
Item no.: 00900330-01
www.asm-smt.com Printed by ASM Assembly Systems
3Instruction manual ASM ProcessLens 03/2021
Table Of Contents
Table Of Contents
1 Introduction.. 7
1.1 Machine overview.. 7
1.1.1 Machine description.. 8
1.1.2 Serial number of the machine.. 9
1.1.3 EU Declaration of Conformity.. 9
1.1.4 Use as prescribed.. 9
1.1.5 Failure to use as prescribed.. 10
1.1.6 Noise emissions.. 10
1.1.7 Important notes on environmentally-friendly disposal of materials and components.. 10
1.1.8 Electromagnetic compatibility (EMC).. 10
1.1.9 Note on original ASM SMT Solutions accessories.. 10
1.2 Qualification and training of personnel.. 10
1.3 Operator levels.. 11
1.4 Important notes on this instruction manual.. 12
1.4.1 Contents and filing of this instruction manual.. 12
1.4.2 Danger notes.. 12
1.4.3 Manufacturer's/supplier's liability.. 12
1.4.4 Revision table.. 12
1.4.5 Further information about and contents of the documentation package.. 12
1.4.5.1 How to get information.. 12
1.4.5.2 ASM on the World Wide Web (WWW).. 13
1.4.6 Abbreviations.. 13
2 Safety.. 15
2.1 Conventions for the use of safety instructions and symbols.. 15
2.1.1 Qualified personnel.. 15
2.1.2 Important notes on operational safety.. 16
2.1.2.1 General.. 16
2.1.2.2 Safety of operators and other persons.. 16
2.1.2.3 Safety of plant and equipment.. 17
2.1.3 Safety instructions on permanent magnets.. 17
2.2 Warning labels.. 19
2.2.1 Warning labels on the machine.. 20
2.2.2 Warning labels in the machine.. 22
2.2.3 Warning lables on the conveyor.. 25
2.2.3.1 Dual conveyor.. 25
2.2.3.2 Single conveyor.. 26
2.2.4 Description of the warning labels.. 26
2.2.4.1 Warning label W 201.. 26
2.2.4.2 Warning label: Hazardous voltage – W81-00382.. 27
2.2.4.3 Warning label – Laser class 2.. 27
2.2.4.4 Warning label: Strong magnets – W202.. 27
2.2.4.5 Warning label: Emergency stop – W210.. 28
2.2.4.6 Warning label W203.. 28
2.2.4.7 Warning label W206.. 28
2.2.4.8 Warning label - Hazardous Voltage.. 28
2.2.4.9 Warning label P010 - Do Not Touch.. 29
2.2.4.10 Warning label: Hot surface – W026.. 29
2.2.4.11 Warning label PSUC - Power Supply Unit Cover.. 29
2.2.4.12 Warning label – Laser radiation.. 29
4 Instruction manual ASM ProcessLens 03/2021
Table Of Contents
2.2.4.13 Warning label - Sensitive conveyor side.. 30
2.2.4.14 Warning label - Support pins 94 mm.. 30
2.2.4.15 Warning label - Entanglement hazard.. 30
2.2.4.16 Warning label - General warning/attention.. 30
2.2.5 Other Labels.. 31
2.2.5.1 Label - External grounding point.. 31
2.2.5.2 Label – Ground.. 31
2.3 Safety instructions for transporting the machine.. 31
2.4 Safety instructions for operating the machine.. 32
2.4.1 Safety instructions for closing the protective covers.. 32
2.4.2 Insertion of board into the input and output conveyor.. 33
2.4.3 ESD safety of machine.. 33
2.5 Safety features.. 34
2.5.1 Protective hood, doors and covers.. 34
2.5.2 Switches and buttons on the machine.. 36
2.5.2.1 Position of switches and buttons on the machine.. 36
2.5.2.2 Description of functions.. 36
2.5.2.3 Position of protective switch on the machine.. 38
2.5.3 Emergency stop loops and signaling circuit.. 40
2.5.3.1 Emergency stop loop structure.. 40
2.5.3.2 Description of the functions of the EMERGENCY STOP loops.. 40
2.6 Residual voltages and discharge times in the machine.. 40
2.6.1 Energy state of the machine after the EMERGENCY STOP button is pressed.. 40
2.6.2 Energy state of the machine after switching off the main power switch.. 40
2.6.2.1 Machine switched off at the main power switch and disconnected.. 41
2.7 Lock out and tag out procedure.. 41
2.7.1 Purpose and scope.. 41
2.7.2 Description.. 42
2.7.3 Testing.. 42
2.7.4 Responsibility and obligations.. 43
2.7.5 Training.. 43
2.7.6 Review.. 43
2.8 ESD guidelines.. 44
2.8.1 What does ESD mean?.. 44
2.8.2 Important measures to protect against static charging.. 44
2.8.3 Handling ESD modules.. 44
2.8.4 Measurements and modifications to ESD modules.. 44
2.8.5 Dispatching ESD modules.. 45
3 Machine description.. 47
3.1 Overview of the modules.. 47
3.1.1 Overview of assemblies.. 47
3.1.2 Inspection head.. 48
3.1.2.1 Description.. 48
3.1.3 Dual conveyor assembly.. 49
3.1.3.1 Description.. 49
3.1.4 Single conveyor assembly.. 50
3.1.4.1 Description.. 50
3.1.5 Definition of PCB warpage.. 50
3.1.5.1 PCB warpage on the conveyor.. 50
3.1.5.2 Maximum PCB warpage allowed during processing of the board.. 52
3.2 Technical data.. 53
3.2.1 Dimensions and ambient conditions for machine operation.. 53