00900330-01_UM_ASM-ProcessLens_EN - 第74页

4 Setting up and commissioning 4.4 Commissioning the machine 74 Instruction manual ASM ProcessLens 03/2021 Fig.49: Position of the shipping brace - Rear side of the machine 1 Shipping brace

4 Setting up and commissioning

4.4 Commissioning the machine

Instruction manual ASM ProcessLens 03/2021 73

Fig.48: Position of the shipping braces - Front side of the machine (part 3)

1 Shipping braces

4 Setting up and commissioning

4.4 Commissioning the machine

74 Instruction manual ASM ProcessLens 03/2021

Fig.49: Position of the shipping brace - Rear side of the machine

1 Shipping brace

5 Working with the machine



Instruction manual ASM ProcessLens 03/2021 75

5 Working with the machine

For detailed description, please refer to the following documentations:

●

ProcessLens Programming Training [Item No.: 00900063-xx]

●

ProcessLens Technical Training [Item No.: 00900064-xx]

●

SPC Basic Training [Item No.: 00900065-xx]

●

SPC Advanced Training [Item No.: 00900066-xx]

●

Software User Guide [Item No.: 00900309-xx]

CAUTION

Qualified or adequately trained personnel

► No one may start up, operate or otherwise work on the machine unless they have the

relevant qualification. Using the machine not as prescribed, could endanger life and

limb, and result in material damage. You will find further information about this in sec-

tion 1.1.5 "Failure to use as prescribed" [}10].

► The qualification must be proven by means of training courses or instructions for the

personnel. The instructions are to be given by personnel trained and authorized by

ASM SMT Solutions Team. For an overview of the training courses, refer to section

1.2 "Qualification and training of personnel" [}10].