00900330-01_UM_ASM-ProcessLens_EN - 第75页
5 Working with the machine Instruction manual ASM ProcessLens 03/2021 75 5 Working with the machine For detailed description, please refer to the following documentations: ● ProcessLens Programming Training [Item No.: …
4 Setting up and commissioning
4.4 Commissioning the machine
74 Instruction manual ASM ProcessLens 03/2021
Fig.49: Position of the shipping brace - Rear side of the machine
1 Shipping brace
5 Working with the machine
Instruction manual ASM ProcessLens 03/2021 75
5 Working with the machine
For detailed description, please refer to the following documentations:
●
ProcessLens Programming Training [Item No.: 00900063-xx]
●
ProcessLens Technical Training [Item No.: 00900064-xx]
●
SPC Basic Training [Item No.: 00900065-xx]
●
SPC Advanced Training [Item No.: 00900066-xx]
●
Software User Guide [Item No.: 00900309-xx]
CAUTION
Qualified or adequately trained personnel
► No one may start up, operate or otherwise work on the machine unless they have the
relevant qualification. Using the machine not as prescribed, could endanger life and
limb, and result in material damage. You will find further information about this in sec-
tion 1.1.5 "Failure to use as prescribed" [}10].
► The qualification must be proven by means of training courses or instructions for the
personnel. The instructions are to be given by personnel trained and authorized by
ASM SMT Solutions Team. For an overview of the training courses, refer to section
1.2 "Qualification and training of personnel" [}10].
5 Working with the machine
5.1 Controls and displays
76 Instruction manual ASM ProcessLens 03/2021
5.1 Controls and displays
5.1.1 Overview
Fig.50: Controls and displays
1 Tower lamp with buzzer 2 LCD monitor
3 Keyboard and mouse 4 External grounding point
5 EMERGENCY STOP button 6 Main switch
7 Power ON lamp 8 Key switch
9 Start button (green) 10 Stop button (black)
5.1.2 Description
All the controls can be reached by a 1.40 m tall person.
Programmable tower lamp with buzzer
(see fig. "Controls and displays" [}76])
The programmable tower lamp is used to signal operating statuses and malfunctions of the
machine. The buzzer indicates when an alert has occurred. The sequence of colors of the tower
lamps is red - amber - green.
The programmable tower lamp functionality allows the operator to assign a combination of the fol-
lowing states of machine events: