SIPLACE D4-D4i 工程师手册_EN - 第11页
Introduction 1.2.6 Abbreviations Staff Qualifications and Training Service Manual SIPLACE D4/D4i 11 1.2.6 1 . 2 . 6 A b b r e v ia t io n s Abbreviations 1.3 1 . 3 S t a f f Q u a lif ic a t io n s a n d T r a in in g St…
Introduction
Key Information 1.2.2 Validity of Document
10 Service Manual SIPLACE D4/D4i
(0049) 089 20800 48642
or send an e-mail to: hotline.siplace@siemens.com.
1.2.2
1.2.2 Validity of Document
Validity of Document
This document contains instructions about the service work for all D3 machines from the SIPLACE D
series.
The service work is listed on a module by module basis:
▪ If the work required for specific machines should differ from the standard procedure, this will be in-
dicated with reference to the machine number, series and various delivery statuses.
▪ Diagrams should be seen as examples e.g. the diagram of a machine with different paint finish does
not mean that the following information only applies to the machine type shown.
The main focus of this manual is on a description of mechanical service work.
Please refer to the circuit diagram folder supplied with your machine for any electrical checks:
▪ Siplace D3 circuit diagram folder, item no. 00195091-xx (German and English)
1.2.3
1.2.3 Release History
Release History
1.2.4
1.2.4 Further Information
Further Information
If you have any questions about this manual or if you would like more information about certain subjects,
please contact your local Siemens branch or us directly:
Siemens Electronics Assembly Systems
Rupert-Mayer-Strasse 44
81379 Munich, Germany
Tel.: +49 (89) 20800 – 27819
Fax: +49 (89) 20800 – 36692
E-mail: siplace.de@siemens.com
1.2.5
1.2.5 SIPLACE on the World Wide Web (WWW)
SIPLACE on the World Wide Web (WWW)
Log into our SIPLACE® homepage at http://www.siplace.com.
► Select either the German or English version.
The different sections contain information about our products, services and contact persons.
In addition, registered customers can access the
SIPLACE User Group
. Here you can call up special
information about our placement systems e.g.
▪ Technical documentation,
▪ Technical information,
▪ Spare parts lists etc.
Registration for the user group is very simple:
► Click on the Register link.
► Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access authorization with USER ID and password.
Release Changes
07/2007
(initial release)
(After data migration)
08/2008 Corrected version
Revision of the C&P and Twin Head chapters
11/2013 Corrected version
Revision of the PCB conveyor system chapter
Introduction
1.2.6 Abbreviations Staff Qualifications and Training
Service Manual SIPLACE D4/D4i 11
1.2.6
1.2.6 Abbreviations
Abbreviations
1.3
1.3 Staff Qualifications and Training
Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up, op-
eration and maintenance of automatic placement systems and add-on devices and are suitably qualified,
e.g.:
▪ Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical
circuits and system components in accordance with normal safety standards.
▪ Have been trained or instructed in the upkeep and use of appropriate safety equipment in accord-
ance with normal safety standards.
▪ Have received first aid training.
PA Placement area
CO Component
C&P Collect&Place
C&P12 Collect&Place head with 12 segments
C&P20 Collect&Place head with 20 segments
C&P6 Collect&Place head with 6 segments
CPP Collect&Pick&Place head
DC Dual conveyor
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
SC Single conveyor
PCB Printed circuit board
MTC Matrix tray changer
NC Nozzle changer
P&P Pick&Place
QC Quad lane conveyor
SC Station computer
TH TwinHead
VS Vision system
WPC Waffle pack changer
Introduction
Staff Qualifications and Training 1.2.6 Abbreviations
12 Service Manual SIPLACE D4/D4i