SIPLACE D4-D4i 工程师手册_EN - 第139页
Service Work 4.4.18 Overview of the Electrical Components PCB conveyor system Service Manual SIPLACE D4/D4i 139 Removal /installation of receiver module 4.4.18 4 . 4 . 1 8 O v e r v ie w o f t h e E le c t r ic a l C o m…
Service Work
PCB conveyor system 4.4.17 Replacing the Laser Light Barriers for Stopper Positions [00370385]
138 Service Manual SIPLACE D4/D4i
Overview
Removal/Installation of transmitter module assembly
Legend
1. Transmitter module (amplifier) with 2 screws
2. Transmitter module (round laser diode) with 3 screws
DANGER! The laser light barrier emits class 2
laser beams (from its transmitter).
You therefore do not require additional protective meas-
ures!
Keep your eyes away from the laser beam!
NOTICE! After setting the laser light barrier you
must check or re-teach the PCB reference corner!
► Move the PCB conveyor to the position which gives
you best access to the laser light barrier.
► Move the Y gantries into the area outside the PCB
conveyor.
► Switch off the machine and secure it to prevent unau-
thorized reactivation.
1
2
► Loosen the 2 fastening screws on the large transmit-
ter module (1) and the 3 fastening screws on the
small transmitter module (2). Make sure you do not
lose the O-rings.
► Unthread the connection cable as far as the relevant
conversion board of the conveyor side.
► Unplug the conversion board of the conveyor side.
► Reconnect the conversion board of the conveyor side
to the power supply and rerun the connection cable
accordingly.
► Fix the new transmitter module in the original posi-
tion.
► Make sure that the 3 O-rings are placed on the 3 fas-
tening screws.
► Switch the machine on.
► Move the conveyor system to maximum width.
► Turn the 3 fastening screws to align the transmitter di-
ode centrally to the receiver. The entire height of the
laser beam must hit the receiver. Please also refer to
the adjustment instructions.
1
2
Service Work
4.4.18 Overview of the Electrical Components PCB conveyor system
Service Manual SIPLACE D4/D4i 139
Removal /installation of receiver module
4.4.18
4.4.18 Overview of the Electrical Components
Overview of the Electrical Components
4.4.18.1
4.4.18.1 Conveyor Side Conversion Board [00359424]
Conveyor Side Conversion Board [00359424]
Overview
► Loosen the 2 screws fastening the receiver module
(1).
► Unthread the connection cable as far as the relevant
conversion board of the conveyor side.
► Unplug the conversion board of the conveyor side.
► Reconnect the conversion board of the conveyor side
to the power supply and rerun the connection cable
accordingly.
► Fit the new receiver module in the original position.
► Switch the machine on.
► Move the conveyor system to maximum width.
► Turn the 2 fastening screws to align the receiver cen-
trally to the transmitter diode. The entire height of the
transmitter diode laser beam must hit the receiver.
Please also refer to the adjustment instructions.
1
Legend
1. Conveyor side conversion board
2. Cover
The conversion boards for the conveyor sides (1) are sit-
uated on the respective conveyor sides, under a cover
(2).
For terminal assignment details, please refer to the cur-
rent version of the circuit diagram folder.
1
2
Service Work
PCB conveyor system 4.4.18 Overview of the Electrical Components
140 Service Manual SIPLACE D4/D4i
4.4.18.2
4.4.18.2 Conveyor Conversion Board [00359425]
Conveyor Conversion Board [00359425]
Overview
4.4.18.3
4.4.18.3 Lifting Table Conversion Board [00362766]
Lifting Table Conversion Board [00362766]
Overview
4.4.18.4
4.4.18.4 Conveyor Control TSP 301 [00370397]
Conveyor Control TSP 301 [00370397]
Overview
Legend
1. Conveyor conversion board
2. Cover
The conveyor conversion board (1) is situated in the vi-
cinity of the intermediate conveyor, under the cover (2).
For terminal assignment details, please refer to the cur-
rent version of the circuit diagram folder.
1
2
Legend
1. Lifting table conversion board
2. Cover
The lifting table conversion board (1) is situated on the
lifting table unit, under the cover (2).
For terminal assignment details, please refer to the cur-
rent version of the circuit diagram folder.
1
2
Legend
1. Conveyor Control TSP 301
2. Access to conveyor control
3. Transport direction
The conveyor control TSP 301 (1) is located in the sector
distributor 1 (2). The conveyor control is secured with a
screw-off cover.
For terminal assignment details, please refer to the cur-
rent version of the circuit diagram folder.