SIPLACE D4-D4i 工程师手册_EN - 第201页

Settings 6.2.3 Description of the PCB boards on the Gantry Gantry Service Manual SIPLACE D4/D4i 201 6.2.3.1 6 . 2 . 3 . 1 G a n t r y H e a d D is t r ib u t o r Gantry Head Distributor Gantry head distri butor (from abo…

Settings

Gantry 6.2.3 Description of the PCB boards on the Gantry

200 Service Manual SIPLACE D4/D4i

6.2.2.5

6.2.2.5 Anticrash Function - Procedure

Anticrash Function - Procedure

Example of the sequence for the anticrash function in placement area 1

6.2.3

6.2.3 Description of the PCB boards on the Gantry

Description of the PCB boards on the Gantry

The boards on the gantry described below are basically identical and do not depend on the head con-

figuration of D1, D2 and D4 machines (the D3 has a different board here). The CAN bus terminating re-

sistor is fixed onto the gantry head distributor.

Settings

6.2.3 Description of the PCB boards on the Gantry Gantry

Service Manual SIPLACE D4/D4i 201

6.2.3.1

6.2.3.1 Gantry Head Distributor

Gantry Head Distributor

Gantry head distributor (from above)

Legend

1 X20 stepping motor for reject position

X19 stepping motor for pickup/place

X18 stepping motor for swiveling in the DP

axis

6 X24 Test connector for „digital track signals

for X-axis“

7 X29 connector for Vision board

2 X13/X14 flat ribbon cable to C&P head 8 X10 Connector vacuum measurement

board

X12 DP axis motor

X16 Reference proximity switch (nor used)

X17 X-axis end position proximity switch

(not used)

X22 Temperature feeler

X21 Free (not used)

3 X11 test connector for CAN Bus, SPI Bus,

RS232

4 X30/X31 flat ribbon cable to P&P head for

D1/D1i (D4/D4i not in use)

5 X5/X6 connector for 16 bit processor

(TQM)

9 X26 connector for CO sensor

Settings

Gantry 6.2.3 Description of the PCB boards on the Gantry

202 Service Manual SIPLACE D4/D4i

Gantry head distributor (from below)

Legend