SIPLACE D4-D4i 工程师手册_EN - 第21页

Overview 3.2.1 Position of the modules Electrical System Service Manual SIPLACE D4/D4i 21 3.2 3 . 2 E le c t r ic a l S y s t e m Electrical System 3.2.1 3 . 2 . 1 P o s it io n o f t h e m o d u le s Position of the mod…

100%1 / 248
Overview
D-Series - General 3.1.3 SIPLACE D3
20 Service Manual SIPLACE D4/D4i
3.1.3
3.1.3 SIPLACE D3
SIPLACE D3
3.1.4
3.1.4 SIPLACE D4
SIPLACE D4
SIPLACE D3 with three gantries
Overview
▪ 3 gantries
▪ 3 placement heads
▪ Component spectrum 01005 – 85 x 85 mm / 125 x 10
mm max. 200 x 125 mm
▪ Placement performance: up to 30,100 components
per hour
▪ Placement accuracy: up to 22 µm at 3 sigma
▪Placement force: 1 N to 30 N
▪ 5-part conveyor with bumper function
▪ Locations:
For more details, refer to the D3 specifications.
SIPLACE D4 with four gantries
Overview
▪ 4 gantries
▪ 4 placement heads
▪ Component spectrum: 01005 – 18.7 x 18.7 mm
▪ Placement performance: up to 60,000 components
per hour
▪ Placement accuracy: up to 60 µm at 3 sigma
▪ Placement force: 2.4 N to 5 N
▪ 5-part conveyor with bumper function
▪ Locations:
For more details, refer to the D4 specifications.
Overview
3.2.1 Position of the modules Electrical System
Service Manual SIPLACE D4/D4i 21
3.2
3.2 Electrical System
Electrical System
3.2.1
3.2.1 Position of the modules
Position of the modules
Position of the modules
Legend
1 Power supply unit 6 Sector 2
2 Axis unit for placement areas 2 + 3 7 Sector 3
3 Computer unit 8 Sector 4
4 Axis unit for placement areas 1 + 4 9 Transport direction
5Sector1
Overview
Electrical System 3.2.2 Power Supply Unit
22 Service Manual SIPLACE D4/D4i
3.2.2
3.2.2 Power Supply Unit
Power Supply Unit
Power supply unit
The power supply unit is located in the left of the central machine section. A lockable door prevents ac-
cess to the unit.
3.2.2.1
3.2.2.1 Supply Voltages
Supply Voltages
The power supply unit provides the following supply voltages:
▪ 200 V for the servo amplifier of the X and Y axes in the axis unit
▪ 100 V- / 4 V- for the servo amplifier of the star in the axis unit
▪ 30 V for the servo amplifier of the Z and DP axes in the axis unit
▪ 52 V- for the DC/DC converter in the distributor of sector 1
▪ 40 V for the changeover tables and the PCB handling system
▪ 8 V for the changeover tables
▪ 3 x 230 VAC for the lifting table motors of the single or dual conveyor (option)
▪ 230 VAC for the UPS for the station computer and monitors