SMN-Tape Feeder Manual(Eng Ver5).pdf - 第38页

Samsung SM-Series Pneumatic T ape Feeder Users' Manual 2-8 Adjust while pulling the upper cover tape backwa rd to fit to the slot of the tape guide. Caution Use after checking as the vinyl can become wound if the up…

Operation of the Tape Feeder

2-7

2.1.4. Locking

Insert the movement slot of the transportation tape in the sprocket. After lowering the tape

guide downward, confirm that the transportation tape is correctly inserted into the

sprocket while the transportation tape is in contact.

Caution

While lowering the 8-16mm tape guide, confirm if the

shutter slot is inserted into the shutter lever pin.

The tape guide will not be closed if it is incorrectly inserted

into the shutter slot. In this case, do not force the tape

guide, and close it after fitting the shutter lever pin into the

shutter slot. In this case, check before using as the

equipment or feeder can be seriously damaged by

abnormal operation.

Caution

Use after checking for abnormal operations such as failing

to gear, which may occur when the movement slot of the

transportation tape is incorrectly inserted into the

sprocket.

Figure 2-11. Installing the carrier tape on the sprocket

Tape guide

Carrier tape

Locker

Sprocket

Samsung SM-Series Pneumatic Tape Feeder Users' Manual

2-8

Adjust while pulling the upper cover tape backward to fit to the slot of the tape guide.

Caution

Use after checking as the vinyl can become wound if the

upper cover tape is not setup to come out of the tape

guide smoothly.

Push locker in the direction of the tape guide and fix the tape guide and locker.

Caution

Be careful not to close the locker while the tape guide is

open.

Make final confirmation by checking if the tape is correctly setup in the tape guide and

frame, and checking if the sprocket is correctly protruding from the moving slot of the

transportation tape.

Figure 2-12. Confirm the setting of the tape guide, tape and frame (SM 8mm tape feeder)

Caution

If the transportation tape is incompletely attached by

correctly setting the transportation tape at the tape guide

& frame in the tape feeder, the tape may not be supplied

and the dump rate of the components may increase.

Therefore, ensure that they are tightly contacted prior to

using the tape feeder.

Tape

Frame

Tape Guide

Operation of the Tape Feeder

2-9

Ensure that the tape guide and the locker are properly locked.

Figure 2-13. Checking the locking state of the tape guide and the locker (SM 12mm~16mm tape

feeder)

Figure 2-14. Checking the locking state of the tape guide and the locker (SM 24mm~88mm tape

feeder)

Caution

Check the locking state of the tape guide and the locker.

The tape feeder whose tape guide and lock cover are not

properly locked may cause problems such as lack of tape

supply or collision with the machine. Ensure that they are

properly locked prior to use.