SMN-Tape Feeder Manual(Eng Ver5).pdf - 第56页

Samsung SM-Series Pneumatic T ape Feeder Users' Manual 2-26 2.5.2. T ape Connection Method (Paper T ype) [Based on 8mm] 1. Cut the end part of the tape in use and the beginning part of the new tape by using scissors…

Operation of the Tape Feeder

2-25

 Scissors for Splicing

 Jig for Vinyl Splicing Tape

 Portable Splicing Tool

Samsung SM-Series Pneumatic Tape Feeder Users' Manual

2-26

2.5.2. Tape Connection Method (Paper Type)

[Based on 8mm]

1. Cut the end part of the tape in use and the beginning part of the new tape by using

scissors.

Cutting with scissors for

general use

Position for cutting with scissors

Cutting with scissors for

splicing

Cutting with scissors for splicing

Cutting with scissors for general use

Cutting together with vinyl tape

Operation of the Tape Feeder

2-27

2. Peel off the vinyl tape on the leading end of the new tape (approximately 2mm).

3. Place the H-shape tip in the tool so that the burr is on the top.

4. Place the tape in use in the H-shaped tip and move the pressing device.

When the vinyl tape is peeled off

Peeling off the vinyl tape using a tool

when it was not peeled off in advance