ACT - Accuracy Check Tool - 第141页
ACT with SSW 7xx / User Manual 07/2017 Edition 33 Optional ACT programs for LED Cent ering as of SIPLACE Pro 12.1 Machine Head Camera Nozzle Placemen t P rogram SX Series 1 x CPP SST47 2004 ACT_1x CPP_LED -Centering G1 (…
ACT with SSW 7xx / User Manual 07/2017 Edition
32
Optional ACT programs for Tray in Conveyor as of SIPLACE Pro 11.1
Machine Head Camera Nozzle Conveyor Placement Program
X-/SX-/DX-
series,
X-series S; TX;
TH-IC,
P&P-IC,
CPP (P&P mode)
SST 33,
SST 36
518 / 2057 Single
ACT_CC02-
05_PP_ConveyorTray left
(48 x CC02-05)
Tray + ACT board connected with
adapter in single conveyor mode.
The tray is mounted to the left of the
glass plate.
X-/SX-/DX-
series,
X-series S; TX;
TH-IC,
P&P-IC,
CPP (P&P mode)
SST 33,
SST 36
518 / 2057 Single
ACT_CC02-
05_PP_ConveyorTray right
(48 x CC02-05)
Tray + ACT board connected with
adapter in single conveyor mode.
The tray is mounted to the right of the
glass plate.
X-/SX-/DX-
series,
X-series S; TX;
TH-IC,
P&P-IC,
CPP (P&P mode)
SST 25, 518 Single
ACT_CC02-
05_FC_ConveyorTray left
(48 x CC02-05)
Tray + ACT board connected with
adapter in single conveyor mode.
The tray is mounted to the left of the
glass plate.
X-/SX-/DX-
series,
X-series S; TX;
TH-IC,
P&P-IC,
CPP (P&P mode)
SST 25 518 Single
ACT_CC02-
05_FC_ConveyorTray right
(48 x CC02-05)
Tray + ACT board connected with
adapter in single conveyor mode.
The tray is mounted to the right of the
glass plate.
X-/SX-/DX-
series,
X-series S; TX;
TH-IC,
P&P-IC,
CPP (P&P mode)
All All Dual
ACT_Spacer in other Lane for
Conveyor Tray
For a job in dual lane synchronous
mode, this empty board is specified in
the lane in which the tray shall be
transported.
Table 4-3: Optional ACT programs for Tray in Conveyor as of SIPLACE Pro version 11.1
ACT with SSW 7xx / User Manual 07/2017 Edition
33
Optional ACT programs for LED Centering as of SIPLACE Pro 12.1
Machine Head Camera Nozzle Placement Program
SX Series 1 x CPP SST47 2004
ACT_1x CPP_LED-Centering G1
(96 x Cerampad)
SX Series 1 x CPP SST47 2004
ACT_1x CPP_LED-Centering G2
(96 x Cerampad)
SX Series 2 x CPP SST47 2004
ACT_2x CPP_LED-Centering
(2 x 96 x Cerampad)
Table 4-4: Optional ACT programs for LED Centering as of SIPLACE Pro version 12.1
4.1.1.3 Placement Program Overview for TX micron, CA (High Accuracy)
Station software version as of 710.0 and SIPLACE Pro ≥ 14.0
ACT programs for placement machines with high accuracy classes
Table 4-5: ACT programs for placement machines with high accuracy classes as of SIPLACE Pro version 14.0
ACT with SSW 7xx / User Manual 07/2017 Edition
34
4.1.2 Specifying the Boards
► Select a suiting placement program for your head configuration from the pre-configured boards
(with the aid of the tables under 4.1 ff).
► Specify a job (recipe) in SIPLACE Pro Line Control and send it to the line (download).
NOTICE
Placement machines with dual conveyors
When using a dual conveyor, the ACT should be run with both conveyor lanes.
4.1.2.1 Specifying Programs to be Permanently Stored on the Station
The specified programs downloaded to the SIPLACE station are stored temporarily on the station.
However, this is a FIFO principle.
Therefore, ACT programs which are rarely used are usually already deleted from the memory
before they are reused.
But especially ACT programs usually do not change as they mainly depend on the machine
configuration.
NOTICE
Specifying Programs to be Permanently Stored on the Station
As of station software version 709.x and SIPLACE Pro 13.1, all placement programs can
now be specified to be permanently stored.
I.e., these programs keep stored on the machine, will not be deleted according to the
FIFO principle and can be used anytime in Stand alone mode at the station.
► First, you have to set the Store permanently on Station column to be visible in the SIPLACE
Pro Line Control GUI program.
In the Tools menu, open the Configuration window.
Figure 4-1: Line Control GUI – Configuration