ACT - Accuracy Check Tool - 第162页
ACT with SSW 7xx / User Manual 07/2017 Edition 54 Figure 4-28: Conveyor interface w indow ► Select LP einfahren (Loading PCB). ► Click OK . If this is not the pla cement station on whi ch the ACT is to be perfor med, the…
ACT with SSW 7xx / User Manual 07/2017 Edition
53
4.2.4 Loading the Plate into the Measuring Machine
4.2.4.1 X-Series
On the SIPLACE X-series machines the glass plate can be inserted into the conveyor by opening
the covers of the input section (extension kit) or the machine cover.
► Insert the plate directly into the input section of the measuring machine so that the sensor is
activated.
► Press Start.
The board is automatically moved into the placement area and gets placed.
Thereafter, the measurement is automatically started, see section 4.2.5.
Figure 4-25 and Figure 4-26 show an assembled ACT plate, in one example with glass
components and in the other with ceramic components.
Figure 4-25: Measuring plate with placed glass comp. Figure 4-26: Measuring plate with placed ceramic comp.
4.2.4.2 SX-Series and DX-Series
On the SIPLACE SX- and DX-series machines the reachability to insert the plate in the input
section is limited, particularly on machines that are placed in the middle or at the end of a line.
Therefore, the plate has to be inserted at the first machine of the line.
► Press Start.
► Insert the plate up to 50%+x into the input section of the first machine.
► Click on the Conveyor interface button directly under the conveyor in the station software
(see Figure 4-27).
Figure 4-27: Conveyor interface button
ACT with SSW 7xx / User Manual 07/2017 Edition
54
Figure 4-28: Conveyor interface window
► Select LP einfahren (Loading PCB).
► Click OK.
If this is not the placement station on which the ACT is to be performed, the plate is automatically
passed through the machine, since there is no specification by SIPLACE Pro for components to be
placed.
If no components are to be placed on the next machine either, the plate is automatically passed
through this machine, too.
On the station being in ACT mode and for which a corresponding specification for components to
be placed is available, the plate is stopped and gets placed automatically in the placement area,
see section 4.2.5.
Then the measurement is started automatically.
ACT with SSW 7xx / User Manual 07/2017 Edition
55
4.2.5 Working with the ACT under Station Software 703.xx to 708.xx
NOTICE
It is not
necessary to install any additional software on the station computer on machines
running version 703.xx and higher of the station software.
Requirements:
● You have already sent a placement/measurement program to the station as described in
section 4.1.
● You have set up the station as described in section 4.2.1.
Figure 4-29: Switching the user level
► Switch to the Einstellungen (Settings) view (1).
► Switch to Benutzereinstellungen (User settings) (2).
► Switch to the Service (Kunde) (Machine service) user level (3).
► Enter the service password.