Nordson_EFD_10th_Edition_Product_Catalog - 第68页
66 www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006 Auger Valves Features and Benets • Adjustable auger speed • Adjustable ow rate • Fast, tool-free re…
65
www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006
High Pressure Valves
736HPA-NV Series
High Pressure Valve
Features and Benets
• Opening surge control
• Adjustable snuff-back cutoff
• Auxiliary air inlet air-assist closure
• Cycle rate exceeds 400/minute
7013449 736HPA-NV Valve
Chromium-plated spool
Fluid body and air cylinder body are passivated 303
stainless steel with a chromium-plated spool. The
fluid inlet and outlet threads are 1/4 NPT female.
7028951 736HPA-NV Valve
Titanium nitride-coated spool
Fluid body and air cylinder body are passivated
303 stainless steel with a titanium nitride-coated
spool. The fluid inlet and outlet threads are 1/4
NPT female.
High pressure fluid inlet fittings are not supplied by
EFD. They are available from the pump supplier.
Specify inlet size 1/4 NPT.
The 736HPA stainless steel balanced spool valve applies uniform amounts of thick
materials like greases and silicones at pressures up to 172 bar (2500 psi).
To keep dots and lines consistent and prevent drooling between shots, the
736HPA-NV valve uses an adjustable stroke control to regulate opening surge and
closing snuff-back.
Actuating Air Input
1/8 NPT
Air Cylinder Cap
Stroke Limit Stop
Piston
Piston Spring
Air Cylinder Body
Spool
Upper Seal
Fluid Body
Fluid Inlet 1/4 NPT
Lower Seal
Fluid Outlet 1/4 NPT
Body Cap
See Valve Controllers for system setup
Order Valve Replacement Parts:
www.nordsonefd.com/ValveKits
For use with
• Adhesives
• Greases
• Sealants
• Silicones
Specications
Size: 134.4l x 35.1dia mm (5.29l x 1.38dia")
Weight: 544.0 g (19.2 oz)
Actuating air pressure 4.8–6.2 bar (70–90 psi)
required:
Maximum uid pressure: 172 bar (2500 psi)
Fluid inlet: 1/4 NPT female
Fluid outlet: 1/4 NPT female
Mounting: (1) 5/16-24 UNF tapped hole or adjustable mounting block
Cycle rate: Exceeds 400 per minute
Air cylinder body: 303 stainless steel
Fluid body: 303 stainless steel
Piston: Hard-coated anodized aluminum
Spool: Hard-chrome coated stainless
Spool seals: Polyester elastomer
Warranty: 1 year, limited
All stainless steel parts are passivated.
www.nordsonefd.com/736Series
66
www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006
Auger Valves
Features and Benets
• Adjustable auger speed
• Adjustable ow rate
• Fast, tool-free release of wetted parts
• Wear-resistant tungsten carbide
wetted parts for higher production
output (794-TC only)
Optimum
Syringe
Reservoir
3cc to 70cc
Syringe Adapter
Assembly
Motor Electrical
Cable to the 7194
Controller
Motor Chamber
Syringe
Clamp
Robot
Mount
Reduction
Gear Assembly
Adjustable Foot
Assembly
Fluid
Chamber
Auger
Supply
Hose
7029745 794-FR Valve
8 pitch, brush motor, fixed head.
7029746 794-FR-16 Valve
16 pitch, brush motor, fixed head.
7363512 794-TC Valve 0.10 mm
High flow (double pitch), brush motor, 0.10 mm
(0.004") gap, tungsten carbide – recommended for
fluids with large particles < 40 μm.
794 Series
Auger Valve
Auger valves use screw-feed technology with precision time and pressure controls to
dispense accurate, repeatable amounts of particle-lled materials, thermal interface
materials (TIM), or other highly abrasive pastes. The auger assembly can be easily
replaced to change the gap size as needed.
The robust tungsten carbide (TC) auger screw and uid body liner on the 794-TC
valve resists wear from highly abrasive pastes to ensure long valve life.
Learn more about EFD custom-made
solder pastes. See Solder Products for details.
Learn more about EFD thermal interface materials.
See Thermal Compound for details.
“We've gone from 30 minutes to 4 minutes
to solder an assembly. I look like a hero for
introducing this.”
– Automotive Assembly
For use with
• Thermal Interface Materials
• Particle-lled Materials
• Solder Pastes
• Thermal Greases
See 7194 Valve Controller for system setup
Specications
Size: 794: 237.5l x 31.8dia mm (9.35l x 1.25dia")
794-TC: 61.0l x 32.0dia mm (2.4l x 1.25 dia")
Weight: 794: 544.0 g (19.2 oz) / 794-TC: 470.0 g (16.6 oz)
Auger speed (dry): 794: 250–500 RPM based on voltage input
794-TC: 170–400 RPM based on voltage input
Auger pitch: 794: 8, 16 / 794-TC: High ow (double pitch)
Input voltage: 12–24 VDC (<10% ripple)
Maximum acceleration: 2.0 g (0.07 oz)
Maximum continuous 794: 240 mA / 794-TC: 240 mA
current: (time delay fuse recommended)
Maximum uid pressure: 2.0 bar (30 psi)
Fluid inlet: 794: 304 stainless steel, 10-32 UNF x 5/32"
794-TC: 1/8" ID tubing supplied for connection
Optional push-in tting: Polypropylene
Mounting: 10-32, low prole
Luer lock tip adapter 303 stainless steel
assembly (794-TC only):
Fluid body (794 only): 440C hardened stainless steel
Fluid inlet tube 303 stainless steel
(794-TC only):
Fluid cartridge liner Tungsten carbide
(794-TC only):
Auger: 794: 440C hardened stainless steel
794-TC: Tungsten carbide
Approvals: China RoHS
Warranty: 1 year, limited
All stainless steel parts are passivated.
794-FR
www.nordsonefd.com/794Series
www.nordsonefd.com/794-TCSeries
67
www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe 00800 7001 7001 Asia +86 (21) 3866 9006
Radial Spinner Systems
Radial Spinner System
Features and Benets
• Applies correct amount on every part
• Applies material in correct location
• Eliminates waste, mess, and rework
• Operates in vertical or horizontal
position
The Radial Spinner System applies consistent amounts of adhesives, lubricants,
and other production uids inside cylindrical parts between 10.2 mm (0.4") and
127.0 mm (5.0") in diameter.
The system combines a compact air-driven motor with a low maintenance EFD
dispense valve and ValveMate controller. The valve dispenses a precisely metered
amount of uid onto a spinning disk attached to the motor. As uid reaches the
edge of the disk, it spins off, forming a neat band inside the part.
RADIAL SPINNER / DISC ASSEMBLIES
Shaft length is 70 mm (2.75") x 3.18 mm (0.125") diameter
Part # Description
7021842 7880-9MM: 9 mm (0.354") radial spinner
/disc
7021836 7880-12MM: 12 mm (0.473") radial spinner
/disc
7021838 7880-15MM: 15 mm (0.590") radial spinner
/disc
7021840 7880-19MM: 19 mm (0.745") radial spinner
/disc
DISPENSING TIPS
Part # Description
7021846 18 gauge needle – 30 degree bend 20/box
7021844 Tip kit: Includes (2) each of 18, 21, and 23 gauge bent tips
7021448 Tip adapter: Rotating luer lock tip for 752V valve
7021798 7860C-RS
Air Motor Bracket Assembly
Radial spinner motor/bracket assembly. Includes all
hoses, #7021844 tip kit, and #7021448 rotating luer
lock tip adapter.
7021795 7860C
Radial spinner air motor only.
www.nordsonefd.com/RadialSpinner
“In manufacturing, reliability is everything.
That's what we get from EFD valves. If all
our equipment worked as well…our jobs
would be easier.”
– Ford Motor Company
For use with
• Anaerobics
• Cyanoacrylates
• Lubricants
• Silicone Gels
• Solvents
See Spray Valve Controllers for system setup
Note: Valves purchased separately. We recommend 752V Series
Diaphragm Valves for use with the Radial Spinner System.