Autosite_Users_Manual - 第136页
Trans lati on Form ats B-38 AutoSite User Manual sample JEDEC tra nsmission sen t in the full format is shown in Figure B-18. Each of the fiel ds is described on the f ollowing pages. JEDEC Field Syntax <field> ::=…
Translation Formats
AutoSite User Manual B-37
JEDEC Full Format, Code 91
The full JEDEC format consists of a start-of-text character (STX), various
fields, an end-of-text character (ETX), and a transmission checksum. A
Translation Formats
B-38 AutoSite User Manual
sample JEDEC transmission sent in the full format is shown in
Figure B-18. Each of the fields is described on the following pages.
JEDEC Field Syntax
<field> ::= [<delimiter>]<field identifier>{<field character>}’*’
Figure B-18
An Example of JEDEC Full Format
ABEL(tm) Version 2.00b JEDEC file for:P20R8
Large Memory Version
Created on: 09-Mar-87 04:45 PM
8-bit barrel shifter
EngineerI Data I/O Corp Redmond WA 10 Jan 1986*
QP24* QF2560*
L0000
1101111111111111111111111111101110111010
1101111111111111111111111011111110111001
1101111111111111111110111111111110110110
1101111111111111101111111111111110110101
1101111111111011111111111111111101111010
1101111110111111111111111111111101111001
1001101111111111111111111111111101110110
1001111111111111111111111111111101110101
1001111111111111111111111111101101110101
1101111111111111111111111111101110111010
1101111111111111111111111011111110111001
1101111111111111111110111111111110110110
1101111111111111101111111111111110110101
1101111111111011111111111111111101111010
1101111110111111111111111111111101111001
1001101111111111111111111111111101110110
1001111111111111111111111111111101110101
1001111111111111111111111111101101110101*
V0001 C1000000000N00HLLLLLLL1N*
V0002 C1000000000N01LHLLLLLL1N*
V0003 C1000000001N00LLHLLLLL1N*
V0004 C1000000001N01LLLHLLLL1N*
V0005 C1000000010N00LLLLHLLL1N*
V0006 C1000000010N01LLLLLHLL1N*
V0007 C1000000011N00LLLLLLHL1N*
V0008 C1000000011N01LLLLLLLH1N*
V0009 C0111111100N00LHHHHHHH1N*
V0010 C0111111100N01HLHHHHHH1N*
V0011 C0111111101N00HHLHHHHH1N*
V0012 C0111111101N01HHHLHHHH1N*
V0013 C0111111110N00HHHHLHHH1N*
V0014 C0111111110N01HHHHHLHH1N*
V0015 C0111111111N00HHHHHHLH1N*
V0016 C0111111111N01HHHHHHHL1N*
V0017 C0000000100N01HLLLLLLL1N*
V0018 C1111111000N01LHHHHHHH1N*
V0019 C0000000000N00HHHHHHHH0N*
V0020 C0000000000N10ZZZZZZZZ1N*
C1B20*
B8C0
Header
(comment area -
everything
preceeding
first * is
ignored)
Number of Pins (24)
and Number of Fuses (2560)
Fuse Address (0000)
Fuse States:
0 = intact
1 = blown
Test Vectors
Fuse Map Checksum
Transmission Checksum
0090-3
Vector
Number
Translation Formats
AutoSite User Manual B-39
<field identifier>::= ‘A’ | ‘C’ | ‘D’ | ‘F’ | ‘G’ | ‘K’ | ‘L’ | ‘N’ | ‘P’ |
‘Q’ | ‘R’ | ‘S’ | ‘T’ | ‘V’ | ‘X’
<reserved identifier>::= ‘B’ | ‘E’ | ‘H’ | ‘I’ | ‘J’ | ‘M’ | ‘O’ | ‘U’ | ‘W’
| ‘Y’ | ‘Z’
Following the design specification field in a JEDEC transmission can be
any number of information fields. Each of the JEDEC fields begins with a
character that identifies what type of field it is. Fields are terminated with
an asterisk character. Multiple character identifiers can be used to create
sub-fields (i.e., A1, A$, or AB3). Although they are not required, you may
use carriage returns (CR) and line feeds (LF) to improve readability of the
data.
Field Identifiers
Field identifiers which are currently used in JEDEC transmissions are
shown above on the “field identifiers” line. The “reserved identifier” line
indicates characters not currently used (reserved for future use as field
identifiers). JEDEC field identifiers are defined as follows:
* Reserved for future use
Device Field (D)
Device selection by this field is not supported by the programmer. It has
been replaced by the QF and QP fields and manual selection of devices.
A Access time N Note field
B* O*
C Checksum field P Pin sequence
D Device type Q Value field
E* RResulting vector field
F Default fuse state field S Starting vector
G Security fuse field T Test cycles
H* U*
I * V Test vector field
J* W*
K Fuse list field (hex format) X Default test condition
L Fuse list field Y *
M* Z *