Autosite_Users_Manual - 第15页

AutoSite User Manual 1-1 Introduction What Is Au toSite? The AutoSite Automat ed Production Programmer is designed specifically for use wit h device handlers in a pro duction environment . AutoSite emplo ys “pin driver a…

100%1 / 175
Preface
xiv AutoSite User Manual
Repair parts and replacement products shall be on an exchange basis and
shall be either new or reconditioned. All replaced parts and products
shall become the property of Data I/O Corporation. Parts will be
delivered to buyer for repair by buyer or, at buyer's option, the product
may be returned to Data I/O Corporation for repair.
Warranty coverage will not be granted if, in the sole opinion of Data I/O
Corporation, the defect or malfunction was caused by accident, abuse or
misuse, neglect, improper packing, or improper or unauthorized
modifications or service. Problems resulting from use of non-Data I/O
labels, ribbons, and other components will invalidate this warranty and
result in service charges.
The buyer is responsible for returning the product, properly packaged in
its original container or equivalent, to a Data I/O service office. Any
insurance or shipping costs incurred in presenting or sending the product
for service is the sole responsibility of the buyer.
This warranty is in lieu of any other warranty, expressed or implied,
including but not limited to, any implied warranty of merchantability
or fitness for a particular purpose, and any other obligations or liability
on the part of Data I/O Corporation.
Repair Service
After the warranty period expires, repair services are available at
Data I/O Service Centers on a time-and-materials basis, and through a
fixed price annual agreement that covers all parts and labor needed to
correct normal malfunctions. The annual agreement includes semiannual
performance certification.
For more information, call the Data I/O Customer Resource Center at the
numbers listed at the front of the Preface. To order a Repair Service
Contract, call Data I/O Corporate Sales at
1
-
800-332-8246
.
End User Registration and Address Change
If the end user for this product or your address has changed since the
Registration Card was mailed, please notify Data I/O Customer Support
at the numbers listed at the front of the Preface. This ensures that you
receive information about product enhancements. Be sure to include the
product serial number, if available.
AutoSite User Manual 1-1
Introduction
What Is AutoSite?
The AutoSite Automated Production Programmer is designed
specifically for use with device handlers in a production environment.
AutoSite employs “pin driver at the pin” technology, which allows the
pin drivers to be as close to the device as possible.
AutoSite supports virtually every programmable memory, logic, and
microcontroller device in DIP, PLCC, and most SOIC packages. Device
support is available through use of different programming modules, each
of which is designed for a specific package type and device pin count.
With programming modules, you can customize device support to suit
your specific programming needs and budget.
AutoSite is composed of two main pieces: the control unit and the pin
driver head. The control unit contains the disk drive, the serial ports, the
power supply, and the circuitry that generates control signals that are
sent to the pin driver head. The pin driver head receives the control
signals from the control unit and generates the voltages necessary to
program a device.
AutoSite comes in two configurations: support for up to 88 pins, with
8MB of RAM; and support for up to 44 pins, with 8MB of RAM. The 44-
pin configuration can easily be upgraded to the 88-pin configuration.
1
Introduction
1-2 AutoSite User Manual
Package Contents
Figure 1-1 shows the contents of the AutoSite system.
Note: If you purchased a ProMaster system, the control unit will already be
installed in the handler.
If you purchased a non-ProMaster system, you should have received a
handler interface kit from your handler manufacturer. See the
documentation supplied with the interface kit for more information and for
a list of the kit’s contents.
Figure 1-1
AutoSite Package Contents
POWER
AUXILIARY
HANDLER
SELF TEST
AUTOSITE
DISKS
POWER CORD
USER
MANUAL
1353-6
PIN DRIVER HEAD
CONTROL UNIT
PROGRAMMING MODULE
CLAMP RING
50-PIN CABLE
68-PIN CABLE
AutoSite
25-PIN TO 25-PIN
RS-232 CABLE
9-PIN TO 25-PIN
RS-232 CABLE