Autosite_Users_Manual - 第30页
Setup and Ins tallation 2-8 Aut oSi te User Manua l 5. Using a 5/32-inch hex driv er, secure the contactor set to the pin driver head mounting plate with the fo ur hex head screws provided. 6. Positi on the pi n driver h…
Setup and Installation
AutoSite User Manual 2-7
4. Position the pin driver head mounting plate on the contactor set as
shown in Figure 2-6. Make sure the guide pins on the contactor set
align with the proper guide holes on the pin driver head mounting
plate.
Figure 2-5
Removing Four Hexhead Bolts from
the Contactor Set
Figure 2-6
Attaching the Contactor Set to the Mounting Plate
1347-1
HEX HEAD SCREW
(1 of 4)
1348-1
PIN DRIVER HEAD
MOUNTING PLATE
CONTACTOR
SET
LARGE GUIDE
PIN (1 of 2)
SMALL GUIDE PIN (1 of 2)
Setup and Installation
2-8 AutoSite User Manual
5. Using a 5/32-inch hex driver, secure the contactor set to the pin
driver head mounting plate with the four hex head screws provided.
6. Position the pin driver head mounting plate up to the 2000. Finger
tighten the thumbscrews on the 2000 to secure the pin driver head
mounting plate to the 2000.
CAUTION: Do not touch or damage the gold pins on the contactor set.
7. Using a 5/32-inch hex driver, attach the two mounting brackets to the
pin driver head with the six hex head screws provided. Position the
mounting brackets as shown in Figure 2-8.
Figure 2-7
Attaching the Pin Driver Head
Mounting Plate to the
ProMaster 2000
Figure 2-8
Attaching the Mounting Brackets
to the Pin Driver Head
1346-1
CONTACTOR SET
THUMBSCREWS
1349-1
MOUNTING
BRACKET
(1 of 2)
HEX HEAD SCREW
(1 of 3 per side)
PIN DRIVER HEAD
Setup and Installation
AutoSite User Manual 2-9
8. Select a programming module that matches the contactor set you
attached to the pin driver head mounting plate in steps 4 and 5. As
shown in Figure 2-9, set the programming module onto the pin driver
head, making sure the guide pins on the pin driver head line up with
the guide holes in the programming module.
Figure 2-9
Aligning the Programming Module
on the Pin Driver Head
1350-1
PROGRAMMING
MODULE
PIN DRIVER
HEAD
GUIDE PIN (1 of 4)