Autosite_Users_Manual - 第98页
Computer Remote Control A-8 AutoSite User Manu al n 61] Get secto r configuration settings HHHH HHHH> nhhhhh hhh 62] Set se ctor conf igurat ion sett ings > 63] Reboot the programmer xxx.. .xxxx 64] Select device p…
Computer Remote Control
AutoSite User Manual A-7
n
3C] Set data transfer port >
xxx...xxxx
3E] Select Keep Current file >
39] Delete all RAM files >
40] or
n
40] Upload device information See Application Note
n
41] Perform self-tests and report
results AAA...AA>
43] Upload yield tally See Application Note
46] Clear yield tally >
49] Suspend CRC mode Displays terminal screen
n
4A] Get filename from disk AAA...AA>
n
4D Select algorithms type >
n
4F Set RAM device selection >
n
52] Select algorithm media (floppy
disk or MSM) >
xxx...xxxx
53] Save RAM data to disk file >
54] Upload device footnote See Application Note
55] Upload device-specific message See Application Note
56] Upload memory verify failure
dd
PAAAAAAAAHH
hh
57] Returns checksum of last
operation >
58] Upload system ID HHHH HHHH HHHH>
n
59] Enable/disable capacitor
configuration test
0=enable; 1=disable
>
5A] Display list of parameters See Application Note
5B] Clear vector data >
5C] Load system files for CM
algorithm disk >
5D] Write system files to CM disk >
5E] Write algorithms to CM disk >
n
5F] Select CM algorithm drive for
creating CM algorithms >
60] Get number of sectors dd>
Command Description Response
Computer Remote Control
A-8 AutoSite User Manual
n
61] Get sector configuration settings HHHH HHHH>
nhhhhhhhh
62] Set sector configuration settings >
63] Reboot the programmer
xxx...xxxx
64] Select device part number for
CM (use
xxx...xxxx
33] to select
the manufacturer) >
A65] Return the software version
number
n
66] Set Abort on Empty Socket >
n
67] Set Checksum calculation word
size >
A7 Swap bytes >
DC] Device check See Application Note
EB] Input JEDEC data from host >
EC] Output JEDEC data to host >
FC] Restore CRC entry default
parameter >
FD] Restore user-defined CRC
parameters >
FE] Save user-defined CRC
parameters >
Command Description Response
AutoSite User Manual B-1
Translation Formats
Translation formats are different ways of encoding the data in a data file.
A data file contains the information to be programmed into a device. The
data file could contain the fuse pattern and test vectors for a logic device
or the data for a memory device.
Generally, the data, such as the fuse pattern for a logic device, are created
on a development platform and are then stored in a particular data
translation format. When you want to transfer the data file to the
programmer, you will need to set up the programmer to handle the
correct translation format. During download, the programmer translates
the formatted data and stores them in user memory as a binary image file.
B