00196504-02_UM_X-Serie_SR70X_EN - 第105页
User manual SIPLACE X-series Technical data for the machine From software version SR.70x.xx 01/2011 EN edition Ratings 105 3.2 Ratings 3.2.1 Electrical ratings 3 3 3 3 3.2.2 Pneumatic ratings and compressed air specifica…
Technical data for the machine User manual SIPLACE X-series
Performance data From software version SR.70x.xx 01/2011 EN edition
104
Feeding -capacity SIPLACE X4, X3, X2
160 tracks Width: 8 mm 8 mm X tape feeder modules
160 tracks Width: 8 mm 2x8 mm X tape feeder modules
80 tracks Width: 12 mm 12 mm X tape feeder modules
52 tracks Width: 16 mm 16 mm X tape feeder modules
52 tracks Width: 24 mm 24 mm X tape feeder modules
40 tracks Width: 32 mm 32 mm X tape feeder modules
32 tracks Width: 44 mm 44 mm X tape feeder modules
24 tracks Width: 56 mm 56 mm X tape feeder modules
20 tracks Width: 72 mm 72 mm X tape feeder modules
16 tracks Width: 88 mm 88 mm X tape feeder modules
PCB -formats
(length x width)
SIPLACE X4I
50 x 50 mm² to 380 x 535 mm² Single conveyor
50 x 50 mm² to 380 x 250 mm² Dual conveyor
50 x 50 mm² to 380 x 436.5 mm² Dual conveyor in Single con-
veyor mode
PCB -formats
(length x width)
SIPLACE X4, X3, X2
50 x 50 mm² to 450 x 535 mm² Single conveyor
50 x 50 mm² to 450 x 250 mm² Dual conveyor
50 x 50 mm² to 450 x 450 mm² Dual conveyor in "Single con-
veyor mode"
PCB -formats
(length x width)
SIPLACE X4I, X4
50 x 50 mm² to 380 x 114 mm² Quad lane conveyor
50 x 50 mm² to 380 x 306 mm² Quad lane conveyor, Mapping
MFU option
PCB thickness 0.3 to 4.5 mm (thicker PCBs available on request)
PCB conveyor height 830
± 15 mm
Option
900 ± 15 mm
Option
930 ± 15 mm
Standard
950 ± 15 mm
SMEMA option
a) Please note that the range of components that can be placed is also affected by the pad geometry, customer-specific stan-
dards, component packaging tolerances and component tolerances.
b) The accuracy value was measured using the vendor-neutral IPC standard.
c) For components between 6 x 6 mm² and 27 x 27 mm².
d) For components smaller than 6 x 6 mm².
e) For components between 6 x 6 mm² and 16 x 16 mm².
User manual SIPLACE X-series Technical data for the machine
From software version SR.70x.xx 01/2011 EN edition Ratings
105
3.2 Ratings
3.2.1 Electrical ratings
3
3
3
3
3.2.2 Pneumatic ratings and compressed air specification
3.2.2.1 Pneumatic ratings
3
Supply voltage 3 x 200 VAC ± 5 %; 50/60 Hz (Japanese version)
a
a) Connection at terminals 3 x 204 VAC on transformer T1
3 x 208 VAC ± 5 %; 50/60 Hz (U.S.A. version)
a
3 x 230 VAC ± 5 %; 50/60 Hz
3 x 380 VAC ± 5 %; 50/60 Hz
3 x 400 VAC ± 5 %; 50/60 Hz (European version)
3 x 415 VAC ± 5 %; 50/60 Hz
Fuse protection 3 x 32 A (3 x 200 VAC)
3 x 32 A (3 x 208 VAC)
3 x 32 A (3 x 230 VAC)
3 x 16 A (3 x 380 VAC)
3 x 16 A (3 x 400 VAC)
3 x 16 A (3 x 415 VAC)
Nominal apparent power 4.7 kVA (SIPLACE X4I, X4)
4.1 kVA (SIPLACE X3)
3.3 kVA (SIPLACE X2)
Rated current consumption 11.3 A / 3 x 400 VAC (SIPLACE X4I, X4)
9.7 A / 3 x 400 VAC (SIPLACE X3)
8.1 A / 3 x 400 VAC (SIPLACE X2)
Compressed air connection
p
min
p
max
0.5 MPa = 5.0 bar
1.0 MPa = 10 bar
Compressed air connection R 3/4" internal thread (pipe thread) with 1/2" hose -connector
Compressed air consumption
a
in relation to the placement
head -configuration
b
SIPLACE X4I
C&P20/C&P20/C&P20/C&P20 960 Nl/min
C&P20/C&P20/CPP/CPP 720 Nl/min
CPP/CPP/CPP/CPP 480 Nl/min
Technical data for the machine User manual SIPLACE X-series
Ratings From software version SR.70x.xx 01/2011 EN edition
106
PLEASE NOTE 3
The compressed air consumption values with vacuum pump can be found in Section 6.14
, page
421.
3.2.2.2 Compressed air specification
3
SIPLACE X4
C&P20/C&P20/C&P20/C&P20 960 Nl/min
C&P20/C&P20/CPP/CPP 720 Nl/min
C&P20/C&P20/CPP/TH 700 Nl/min
C&P20/C&P20/TH/TH 680 Nl/min
CPP/CPP/CPP/CPP 480 Nl/min
CPP/CPP/CPP/TH 460 Nl/min
CPP/CPP/TH/TH 440 Nl/min
CPP/TH/TH/TH 420 Nl/min
TH/TH/TH/TH 400 Nl/min
SIPLACE X3
C&P20/C&P20/C&P20 720 Nl/min
C&P20/C&P20/CPP 600 Nl/min
C&P20/C&P20/TH 580 Nl/min
CPP/CPP/CPP 360 Nl/min
CPP/CPP/TH 340 Nl/min
CPP/TH/TH 320 Nl/min
TH/TH/TH 300 Nl/min
SIPLACE X2
C&P20/C&P20 480 Nl/min
C&P20/CPP 360 Nl/min
C&P20/TH 340 Nl/min
CPP/CPP 240 Nl/min
CPP/TH 220 Nl/min
TH/TH 200 Nl/min
Operating pressure 0.48 MPa ± 0.025 MPa (4.8 bar ± 0.25 bar)
a) Under normal atmospheric conditions at 20°C and 1013 hPa
b) Average air consumption during placement
Maximum particle size by density, based on ISO/DIS 8573-1 (class 1)
Particle size 0.1 µm
Particle density 0.1 mg/m³
Maximum oil content (class 1) particle density 0.01 mg/m³
Pressure dewpoint (class 4) dewpoint +3°