00196504-02_UM_X-Serie_SR70X_EN - 第202页
Technical data for the machine User manual SIPLACE X-series SIPLACE X-series component trolley From software version SR.70x.xx 01/2011 EN edition 202 3.10.6 SIPLACE X-seri es component table The front slider guides of th…
User manual SIPLACE X-series Technical data for the machine
From software version SR.70x.xx 01/2011 EN edition SIPLACE X-series component trolley
201
3.10.5 Dimensions of the component trolley, SIPLACE X-series
3
Fig. 3.10 - 5 Dimensions of the component trolley, SIPLACE X-series, all dimensions in millimeters
Technical data for the machine User manual SIPLACE X-series
SIPLACE X-series component trolley From software version SR.70x.xx 01/2011 EN edition
202
3.10.6 SIPLACE X-series component table
The front slider guides of the feeder modules are placed on the insertion aid (item 1 in Fig.
3.10 - 6
). As it is pushed in, the guides of the feeder module (item 12 and 13 in Fig. 3.9 - 2, page
173
) slide on the guide profile (item 2 in Fig. 3.10 - 6) as far as the stop bar (item 4 in Fig. 3.10 -
6). A centering hole (item 5 in Fig. 3.10 - 6, page ) on the stop bar holds the "front" centering pin
(item 4 in Fig. 3.9 - 1
, page 172) of the X feeder module. At the same time, the locking latch (item
1 in Fig. 3.10 - 7
, page 203) of the component table latches on the locking roller (item 1 in Fig. 3.9
- 1, page 172) of the feeder module. The "back" centering pin (item 12 in Fig. 3.9 - 1, page 172)
on the top of the feeder module is held by the recess in the centering bar (item 3 in Fig. 3.10 - 6
).
3
Fig. 3.10 - 6 Component table, SIPLACE X-series, back view
(1) Insertion aid
(2) Guide profile ( profile)
(3) Centering bar for holding the "back" centering pin for X feeder modules
(4) Stop bar
(5) Centering holes
(6) Contact for switching the safety switch of the emergency stop circuit
(7) Hand guard
User manual SIPLACE X-series Technical data for the machine
From software version SR.70x.xx 01/2011 EN edition SIPLACE X-series component trolley
203
3
Fig. 3.10 - 7 Component table, SIPLACE X-series, front view
(1) Locking latches
(2) Centering pin on the component table
(3) Compressed air coupling
(4) Grounding pin
(5) Centering hole on the component table