00196504-02_UM_X-Serie_SR70X_EN - 第303页
User manual SIPLACE X-series Tasks on the machine From software version SR.70x.xx 01/2011 EN edition Switch on the SIPLACE line 303 5 Fig. 5.3 - 2 Flow chart: "Switching on the SIPLACE line" Station computer Sw…
Tasks on the machine User manual SIPLACE X-series
Switch on the SIPLACE line From software version SR.70x.xx 01/2011 EN edition
302
5.3.5 What does the machine Start button do?
The response to the Start button can be set.
Open the "Check sensors and functions" view (see section 5.5.3, page 307).
This allows the following settings:
Start basic production automatically 5
Default setting.
Pressing the Start button starts basic production automatically.
Do not change production status 5
For calibrating and testing the machine, for example.
Pressing the Start button only closes the circuit, and does not directly start basic production.
CAUTION
Machine functions can be started directly from the GUI, regardless of the settings for the Start but-
ton. If the circuit is already closed, it is not necessary to confirm again by pressing the Start button
on the machine. 5
5.3.6 Flow chart: "Switching on the SIPLACE line"
The following flow chart shows the actions that are carried out after switching on the SIPLACE
line.
User manual SIPLACE X-series Tasks on the machine
From software version SR.70x.xx 01/2011 EN edition Switch on the SIPLACE line
303
5
Fig. 5.3 - 2 Flow chart: "Switching on the SIPLACE line"
Station computer
Switch on
Check the set-up
(set feeder modules)
Teach fiducials
Loading PCB data
Press Start button
Waiting for reference run
Move PCB in
Waiting for PCB
Check setup
(if table is highlighted in red)
Change nozzle configuration
if necessary
Nozzle check
Fiducials
OK?
Track -er-
rors
Placement
Check setup
Reset tracks
Placement
PCB to output conveyor
Italics:
This is carried out or
reported by the station
Yes
Yes
No
No
Specifications for the machine
Download wizard
Programming system
tasks
Confirm the conversion on the
Download wizard
Tasks on the machine User manual SIPLACE X-series
Switch off the SIPLACE line From software version SR.70x.xx 01/2011 EN edition
304
5.4 Switch off the SIPLACE line
CAUTION
ALWAYS carry out the sequence of actions described below before you switch off the line. 5
5.4.1 Switch off stations
Follow these steps to switch off the station:
End all placement processes so that there are no more PCBs in the machine.
Check that the Z-axes of all placement heads are in their top end position.
Check whether there are still components at the placement head, and remove these if nec-
essary.
Exit the station computer software from the following view:
Settings --> Machine settings --> Shut down machine...
Once the computer has shut down, switch off the station at the main switch.
5.4.2 Exit SIPLACE Pro (Windows)
On the SIPLACE Pro menu bar, select Object --> Exit.
Close all other programs running on the computer.
Select Shut down machine from the Windows Start menu.