00196504-02_UM_X-Serie_SR70X_EN - 第347页

User manual SIPLACE X-series Tasks on the machine From software version SR.70x.xx 01/2011 EN editi on Docking the component trolley in or out 347 CAUTION 5 Be careful when you p ush the CO trolley into the m achine and m…

100%1 / 448
Tasks on the machine User manual SIPLACE X-series
Docking the component trolley in or out From software version SR.70x.xx 01/2011 EN edition
346
→ Remember that a component trolley with the full complement of feeder modules can tip over
sideways or forward on gradients of 20° or more.
→ Make sure that the surface on which the trolley is moved has a significantly smaller gradient.
→ Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast
enough.
5.15.4 Docking in the component trolley
5
Fig. 5.15 - 3 Component trolley and component trolley docking unit, SIPLACE X-series
(1) Component trolley docking unit, SIPLACE X-series
(2) Component trolley, SIPLACE X-series
(3) Locking latches
User manual SIPLACE X-series Tasks on the machine
From software version SR.70x.xx 01/2011 EN edition Docking the component trolley in or out
347
CAUTION 5
Be careful when you push the CO trolley into the machine and make sure that the locking latches
(item 3 in Fig. 5.15 - 3, page 346) do not bump into obstacles.
PLEASE NOTE 5
Cut the component tapes off flush with the front end of the X feeder modules before you dock in
the component trolley.
CAUTION 5
Check that the placement head is outside the range of the component trolley.
→ Carefully push the component trolley into machine as far as the stop.
PLEASE NOTE 5
Close the protective covers since the component trolley can only be docked in if the covers are
closed.
→ Press the relevant button on the input or output side of the machine (item 1, 2, 3 or 4 in Fig.
5.15 - 1
, page 344), until the trolley is docked in fully.
→ Push the sleeve (item 1 in Fig. 5.15 - 4
, page 348) up using both handles and swivel the han-
dle down (item 2 in Fig. 5.15 - 4
, page 348).
Tasks on the machine User manual SIPLACE X-series
Docking the component trolley in or out From software version SR.70x.xx 01/2011 EN edition
348
5
Fig. 5.15 - 4 Component trolley X-series - swivel handles down
(1) Push sleeve up
(2) Fold handle down