00196504-02_UM_X-Serie_SR70X_EN - 第36页
Introduction User manual SIPLACE X-series Important notes on the user manual From software version SR.70x.xx 01/2011 EN edition 36 DC Dual conveyor DCA Direct chip attach EDIF Energy and dat a interface EMC Electromagnet…
User manual SIPLACE X-series Introduction
From software version SR.70x.xx 01/2011 EN edition Important notes on the user manual
35
1.5.5.3 Documentation packages, Edition 01/2011
1
PLEASE NOTE 1
Further information about the station extensions such as assembly, operation and preventive
maintenance described in Chapter 6 can be found on the SIPLACE website. 1
1.5.6 Abbreviations
1
Package contents Language
a
Item no.
DVD product documentation including parts cata-
logs (PDF and HTML), in German and English
Detailed circuit diagrams folder in German/English
User manual in the ordered language version
Preventive maintenance in the ordered language
version
JobGuides / JobPoster
in the ordered language version
Angle gauge / tape gauge in the ordered <NoHy-
phen/>language version
German 00196503-02
English 00196504-02
French 00196505-02
Italian 00196506-02
Spanish 00196507-02
Portuguese 00196508-02
Hungarian 00196509-02
Czech 00196510-02
Russian 00196511-02
Polish 00196512-02
Estonian 00196513-02
Finnish 00196514-02
Swedish 00196515-02
Danish 00196516-02
Dutch 00196517-02
T. Chinese 00196518-02
S. Chinese 00196519-02
Korean 00196520-02
Japanese 00196521-02
a) Other languages available on request
A-placement Alternating placement
C&P20 Collect&Place head with 20 segments, SIPLACE SpeedStar
CO Component
CPP Collect&Pick&Place head, SIPLACE MultiStar
Introduction User manual SIPLACE X-series
Important notes on the user manual From software version SR.70x.xx 01/2011 EN edition
36
DC Dual conveyor
DCA Direct chip attach
EDIF Energy and data interface
EMC Electromagnetic compatibility
EGB Electrostatically-sensitive components
ESD Electrostatic sensitive devices
FC Flip chip
GND Ground
HFH High-force head
I-Placement Independent placement
IC Integrated circuit
MC Machine controller
MFU Machine capability study
MTC Matrix tray changer
OSC Odd shaped components
P&P Pick&Place
P&P1 Pick&Place module 1
P&P2 Pick&Place module 2
PA Placement area
PCB Printed circuit board
SC Single conveyor
SC Station computer
SM Dual conveyor in Single conveyor mode
SMD Surface mounted device
TH Twin Pick&Place head, SIPLACE TwinStar
VS Vision system
WBO Wide board option (21")
WLAN Wireless Local Area Network
WT Waffle-pack tray
WTC Waffle-pack tray carrier
User manual SIPLACE X-series Operational safety
From software version SR.70x.xx 01/2011 EN edition Safety instructions
37
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of hazard symbols
This user manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. These notes are highlighted by warning triangles and are indicated
as follows according to the level of risk:
DANGER or
as used in this user manual means that death, severe injury or considerable damage to equipment
will occur if the danger instructions are not followed.
WARNING or
as used in this user manual means that death, severe injury or considerable damage to equipment
may occur if the warning instructions are not followed.
CAUTION or
as used in this user manual means that slight injury or damage to equipment may occur if the cau-
tion instructions are not followed.
PLEASE NOTE
as used in this user manual provides information on the product or indicates a part of the user
manual that requires particular attention.
2.1.2 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and preventive maintenance of placement machines and add-on devices and are suit-
ably qualified, e.g.
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-
cordance with normal safety standards.
– have received first aid training.