00196504-02_UM_X-Serie_SR70X_EN - 第374页

Station extensions User manual SIPLACE X-series Nozzle changer From softwar e version SR.70x.xx 01/2011 EN edition 374 6.1.2.1 1 "Row 2" nozzle changer for the SIPLACE MultiS tar and S peedSt ar Item no. 001 19…

100%1 / 448
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Nozzle changer
373
PLEASE NOTE 6
– Move the locking plate into the "Magazine locked" position.
– Before inserting, align the magazine so that the centering pins (items 2 and 6 in Fig. 6.1 - 18
,
page 372) slide into the centering hole and slot.
→ Place the magazine on the snap fastener balls (item 5 in Fig. 6.1 - 18
, page 372).
→ Press the magazine down evenly so that the snap fastener balls engage in all the snap fasten-
ers at the same time.
6.1.2.10 Position detection
Each magazine of the nozzle changer has two fiducials: one for determining the position and one
for determining the angular position.
6
Fig. 6.1 - 19 Nozzle magazine - fiducials for determining the position and angular position
(1) Locking plate in the "Magazine open" position
(2) Fiducial for determining the angular position
(3) Fiducial for determining the position
Station extensions User manual SIPLACE X-series
Nozzle changer From software version SR.70x.xx 01/2011 EN edition
374
6.1.2.11 "Row 2" nozzle changer for the SIPLACE MultiStar and SpeedStar
Item no. 00119742-xx Nozzle changer 2, CPP, X-series
The "row 2" nozzle changer may be installed at the following locations:
X4 machine: Locations 1, 2, 3 and 4 (see Fig. 6.1 - 14
, page 367)
X3 machine: Locations 1, 3 and 4 (see Fig. 6.1 - 15
, page 368)
X2 machine: Locations 1 and 3 (see Fig. 6.1 - 16
, page 369)
The retrofit package contains an assembly kit.
6
Fig. 6.1 - 20 Assembly kit for the "row 2" nozzle changer
6
6
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Nozzle changer
375
6.1.3 Nozzle changer for the SIPLACE TwinStar
Item no. 03005191-xx Magazine for 2 nozzles
Item no. 03001807-xx Magazine for 1 nozzle
6
Fig. 6.1 - 21 Nozzle changer for the SIPLACE TwinStar
6.1.3.1 Description
This nozzle changer can hold up to 12 nozzle magazines. There are two types of magazine avail-
able: standard magazines and magazines for special nozzles or grippers. The magazines are
seated on a common support. They are centered with two parallel pins and fixed in place with two
countersunk screws.
6.1.3.2 Technical data
6
6
Nozzle changer for the SIPLACE TwinStar
Dimensions (length x width x height) 448 x 68 x 49 mm³
Number of nozzle holders 16 for standard nozzles
4 for special nozzles or grippers
Nozzle types 5xx, standard
4 xx with adapter
9 xx with adapter
Nozzle changeover time approx. 2 s per nozzle