00196504-02_UM_X-Serie_SR70X_EN - 第375页

User manual SIPLACE X-series Station extensions From software version SR.70x .xx 01/2011 EN edition Nozzle changer 375 6.1.3 Nozzle changer for the SIPLACE T win St ar Item no. 03005191- xx Magazine for 2 nozzles Item no…

100%1 / 448
Station extensions User manual SIPLACE X-series
Nozzle changer From software version SR.70x.xx 01/2011 EN edition
374
6.1.2.11 "Row 2" nozzle changer for the SIPLACE MultiStar and SpeedStar
Item no. 00119742-xx Nozzle changer 2, CPP, X-series
The "row 2" nozzle changer may be installed at the following locations:
X4 machine: Locations 1, 2, 3 and 4 (see Fig. 6.1 - 14
, page 367)
X3 machine: Locations 1, 3 and 4 (see Fig. 6.1 - 15
, page 368)
X2 machine: Locations 1 and 3 (see Fig. 6.1 - 16
, page 369)
The retrofit package contains an assembly kit.
6
Fig. 6.1 - 20 Assembly kit for the "row 2" nozzle changer
6
6
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Nozzle changer
375
6.1.3 Nozzle changer for the SIPLACE TwinStar
Item no. 03005191-xx Magazine for 2 nozzles
Item no. 03001807-xx Magazine for 1 nozzle
6
Fig. 6.1 - 21 Nozzle changer for the SIPLACE TwinStar
6.1.3.1 Description
This nozzle changer can hold up to 12 nozzle magazines. There are two types of magazine avail-
able: standard magazines and magazines for special nozzles or grippers. The magazines are
seated on a common support. They are centered with two parallel pins and fixed in place with two
countersunk screws.
6.1.3.2 Technical data
6
6
Nozzle changer for the SIPLACE TwinStar
Dimensions (length x width x height) 448 x 68 x 49 mm³
Number of nozzle holders 16 for standard nozzles
4 for special nozzles or grippers
Nozzle types 5xx, standard
4 xx with adapter
9 xx with adapter
Nozzle changeover time approx. 2 s per nozzle
Station extensions User manual SIPLACE X-series
Nozzle changer From software version SR.70x.xx 01/2011 EN edition
376
6.1.3.3 Position of the nozzle changers for the TwinStar on the X4 machine
A nozzle changer may be installed for each TwinStar at the following locations:
Nozzle changer 1 at location 3: 12 magazines
Nozzle changer 2 at location 2: 10 magazines
This gives a total capacity of 2 nozzle changers with 22 magazines and a total of 44 nozzle hold-
ers.
6
Fig. 6.1 - 22 Position of the nozzle changers for the TwinStar on the X4 machine
(1) Nozzle changer 1
(2) Standard magazine
(3) Magazine for special nozzles or grippers
(4) Component reject bin
(5) Nozzle changer 2
PLEASE NOTE 6
If there is an MTC installed at location 2 or 4, then the "Nozzle changer for the TwinStar in the
placement area with 2 gantries and docked MTC" option must be set up there (see Section
6.1.3.7, from page 380).