00196504-02_UM_X-Serie_SR70X_EN - 第380页
Station extensions User manual SIPLACE X-series Nozzle changer From softwar e version SR.70x.xx 01/2011 EN edition 380 6.1.3.7 Nozzle changer for the T winSt ar in the placement area with 2 gantries and docked MTC Item n…
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Nozzle changer
379
6.1.3.6 Assembly
The nozzle changer is fixed to the component trolley docking unit.
6
Fig. 6.1 - 25 Assembly position
(1) Marking hole
(2) Operator side
(3) Arrow pointing toward the PCB conveyor
6
→ Align the nozzle changer so that the marking hole (item 1) is on the left, as viewed by the op-
erator.
WARNING 6
Only install the associated nozzle changer for each placement head. There is a risk of head
crashes with mixed configurations.
Station extensions User manual SIPLACE X-series
Nozzle changer From software version SR.70x.xx 01/2011 EN edition
380
6.1.3.7 Nozzle changer for the TwinStar in the placement area with 2 gantries and
docked MTC
Item no. 00119747-xx Holder nozzle changer, TwinStar, X-series with MTC
The standard nozzle changer for the TwinStar cannot be used with a combination of TwinStar and
MTC in placement areas with two gantries. This affects the following locations:
– X4: locations 2 and 4
– X3: location 4
For this situation there is an optional nozzle changer for the TwinStar in the placement area with
2 gantries and docked MTC.
PLEASE NOTE 6
If you are using this nozzle changer option, please note that the maximum component size is 85
x 85 mm² or 125 x 10 mm².
6
Fig. 6.1 - 26 Nozzle changer for the TwinStar in the placement area with 2 gantries and docked MTC
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Nozzle changer
381
6.1.3.8 Nozzle changer 2 for the TwinStar
Item no. 00119717-xx Nozzle changer 2, TwinStar
This nozzle changer can hold up to 10 nozzle magazines. All the other technical data is the same
as for the 1st nozzle changer.
6.1.3.9 Component reject bin for the SIPLACE TwinStar
A component reject bin may be installed for the SIPLACE TwinStar. This is positioned beside the
fine-pitch vision module (see item 4 in Figs. 6.1 - 23
, page 377 and 6.1 - 24, page 378).
6
Fig. 6.1 - 27 Component reject bin for the SIPLACE TwinStar
6.1.3.10 Grippers and special nozzles
The SIPLACE machines can process components based on through-hole technology and odd-
shaped (OSC) components, in addition to the standard SMT spectrum. ASM AS also continuously
develops special nozzles and grippers in parallel.
Special nozzles are available for all placement heads in order to process placement jobs with
maximum speed, precision and flexibility. The use of automatic nozzle changers also reduces the
set-up times that occur at a product change.
ASM AS can provide mechanical grippers for the Pick&Place heads. If a component's surface is
not suitable for sucking up with nozzles, then it can be picked up and placed with mechanical grip-
pers. There are two types of gripper, and their functions can be divided into two groups: