00196504-02_UM_X-Serie_SR70X_EN - 第395页

User manual SIPLACE X-series Station extensions From software version SR.70x.xx 0 1/2011 EN edition Matrix tray changer 395 6.3.3 T ech nical dat a 6.3.3.1 Dimensions, weight, other dat a 6 T ray supply 1 (XL) T ray supp…

100%1 / 448
Station extensions User manual SIPLACE X-series
Matrix tray changer From software version SR.70x.xx 01/2011 EN edition
394
6.3 Matrix tray changer
Item no. 00116438-xx SIPLACE matrix tray changer (MTC)
6.3.1 Safety instructions
WARNING 6
→ Never reach into the gaps between the matrix tray changer and the machine base while the
machine is running.
→ The power supply cable must not be plugged into or unplugged from the external power supply
unless the matrix tray changer is docked into the machine.
→ The matrix tray changer must NOT be operated unless it is docked into the machine.
6.3.2 Description
The matrix tray changer can be used to store and change up to 100 waffle-pack trays fully auto-
matically. The levels (storage locations in the tray supplies) for the waffle-pack trays are numbered
consecutively in ascending order from bottom to top.
The tray supplies move independently of one another in the vertical direction until the selected
magazine is within range of the feed axis. The horizontal feed axis transports the waffle-pack tray
from the tray supply into the access area of the placement head.
Tray supply 1 has 30 levels, each of which can hold 2 JEDEC trays or one large tray up to 240 x
340 mm² from the waffle-pack tray carriers.
Tray supply 2 has a capacity of 40 levels for JEDEC trays.
The matrix tray changer has an integral chassis, and is therefore easy to move to other locations.
It is supplied with the PCB conveyor height implemented for the machines, but can be adapted for
the 830, 900, 930 and 950 mm PCB conveyor heights with just a few simple operations.
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Matrix tray changer
395
6.3.3 Technical data
6.3.3.1 Dimensions, weight, other data
6
Tray supply 1 (XL) Tray supply 2
Dimensions
Length x width
Height
1305 x 600 mm²
1490 mm for 830 mm PCB conveyor height
1560 mm for 900 mm PCB conveyor height
1590 mm for 930 mm PCB conveyor height
1610 mm for 950 mm PCB conveyor height
Weight (basic equipment)
approx. 500 kg (with cassettes
and waffle-pack tray carriers)
Weight (fully equipped) approx. 534 kg (with components)
Weight (moving mass) approx. 80 kg approx. 43.5 kg
Cassette size (L x W x H) 391.2 x 305.6 x 93.3 mm³ 352.7 x 154.8 x 133.8 mm³
Cassette weight
(fully equipped)
(without waffle-pack tray carrier)
approx. 11 kg
approx. 1.7 kg
approx. 7.5 kg
approx. 1.35 kg
Weight of the
waffle-pack tray carrier
850 g 150 g
Dimensions of the
waffle-pack tray carrier (L x W x H) 386.5 x 295.8 x 11.1 mm³ 371 x 146 x 10.1 mm³
Spacing from one cassette to next 96 mm 135 mm
Distance from level to level 12 mm 11.8 mm
Vertical travel 444 mm (1st to 30th WTC)
a
511.2 mm
(1st to 40th WTC
a
)
Horizontal travel between outgoing
and pick-up position approx. 647 mm approx. 638 mm
Storage capacity 30 XL waffle-pack tray carri-
ers with 60 JEDEC or
30 special magazines
of maximum size
40 waffle-pack tray carriers
with
40 JEDEC waffle-pack
trays
Changeover time (over 5 levels) approx. 2 s approx. 1.5 s
Max. height of component and
waffle-pack tray, including tolerances
all levels filled
one level free
two levels free
8.5 mm
19.5 mm
31.5 mm
8.5 mm
19.5 mm
-
a) Waffle-pack tray carrier
Station extensions User manual SIPLACE X-series
Matrix tray changer From software version SR.70x.xx 01/2011 EN edition
396
6.3.3.2 Electrical ratings
6
6.3.3.3 Noise emissions
6
6.3.3.4 Permitted environmental factors
6
6.3.4 Installation notes for the MTC
On the placement machines X4, X3 and X2 an MTC may be docked at locations 2 and 4 in place
of the component trolley. To do this, the docking unit installed for the component trolley must be
replaced with the docking unit for the MTC. If you use the MTC at another location, the location
that becomes free may be set up with a component trolley once more.
PLEASE NOTE 6
For the X2/X3/X4 machines:
– The SpeedStar cannot be used in the vicinity of locations at which an MTC is docked.
Supply voltage 3 x 200 VAC ± 5 %; 50/60 Hz (Japanese version)
3 x 208 VAC ± 5%; 50/60 Hz (U.S.A. version)
3 x 400 VAC ± 5%; 50/60 Hz (European version)
Total power 1.5 kW
Rated current 2.7 A at 3 x 400 VAC
4.2 A at 3 x 208 VAC
Fuse protection 3 x 16 A
Rated power consumption of the
largest consumer
2 A
Max. noise emissions 74 dB (A)
Room temperature between 15°C and 35°C
Atmospheric humidity
30 - 75 %
(No higher than 45% on average to prevent any pos-
sibility of condensation on the machine)