00196504-02_UM_X-Serie_SR70X_EN - 第58页

Operational safety User manual SIPLACE X-se ries Warning labels From software version SR.70x.xx 01/2011 EN edition 58 2.2.7 W arning label on th e emergency stop buttons 2 Pos. W209 in Fig. 2.2 - 13 , item no. 03009349-0…

100%1 / 448
User manual SIPLACE X-series Operational safety
From software version SR.70x.xx 01/2011 EN edition Warning labels
57
2.2.6 Warning label on the CEKON plug
2
Pos. W 211 in Fig. 2.2 - 12, page 57 (number per machine: 1)
2
Fig. 2.2 - 12 Warning label W211 on the CEKON plug
Pos. W211, item no. 03009351-01
2
RESIDUAL VOLTAGE!
Wait 30 seconds after disconnecting the main power plug from the mains to
allow any residual voltages to dissipate.
NAFTA region: Hazardous Voltage
Residual power at plug prongs and wire ends will cause death or serious in-
jury. Avoid contact with power plug and/or wire ends for 30 seconds
Operational safety User manual SIPLACE X-series
Warning labels From software version SR.70x.xx 01/2011 EN edition
58
2.2.7 Warning label on the emergency stop buttons
2
Pos. W209 in Fig. 2.2 - 13, item no. 03009349-01 (number per machine: 2)
2
2
Fig. 2.2 - 13 Warning label W209 on the emergency stop buttons
Pos. W209, item no. 03009349-01
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
For Australia, Canada, Mexico and USA, warn-
ing label W209 is affixed to the extension kit in-
stead of the yellow ring on the emergency stop
buttons.
User manual SIPLACE X-series Operational safety
From software version SR.70x.xx 01/2011 EN edition Warning labels
59
2.2.8 "Head crash" information plate on the IC camera of the TwinStar
"Head crash" information plate in Fig. 2.2 - 14, item no. 03015392-02
(number per machine: maximum 4)
2
Fig. 2.2 - 14 "Head crash" information plate on the IC camera of the TwinStar
(1) "Head crash" information plate on the IC camera of the TwinStar
WARNING RISK OF HEAD CRASH 2
When the placement head is changed from the TwinStar to the
SpeedStar, the TwinStar's component cameras (stationary, P&P,
type 33, 55 x 45, and type 25, 16 x 16) must be removed, otherwise
the SpeedStar will collide with the camera housings.