00193697-01 - 第83页
SIPLACE S oftware Guide SR.504.xx 8 New functionality in 504.01 Issue 01/03 E N 8.1 SIPLACE Twin Head 83 8 New functionality in 504.01 8.1 SIPLAC E T win H ead The T win Head is the su ccesso r to th e IC head for the SI…
SIPLACE Software Guide SR.504.xx
7.7 "Long printed circuit board" option Issue 01/03 EN
82
7.7 "Long printed circuit board" option
7.7.1 Purpose
The "Long printed circuit board" option allows you to process overlength printed circuit boards (up
to a length of 610mm). This setting must be activated in the Setup Properties - Options dialog box
in the SIPLACE Pro programming system. 7
7.7.2 Description
NOTE
Please refer to the "Online Help system for SIPLACE Pro" and the Operating Guide for the
respective machine for a detailed description. 7
7
SIPLACE Software Guide SR.504.xx 8 New functionality in 504.01
Issue 01/03 EN 8.1 SIPLACE Twin Head
83
8 New functionality in 504.01
8.1 SIPLACE Twin Head
The Twin Head is the successor to the IC head for the SIPLACE F machines. It will first be used
with the SIPLACE HF as of software version 504.01. 8
8
The Twin Head functions, the Twin Head compressed air values and the Twin Head nozzle
changer configuration can be called up using the
"Gantry 1" or " Gantry 2" view. 8
8
Fig. 8.1 - 1 "Gantry 2, Twin Head functions" view
8 New functionality in 504.01 SIPLACE Software Guide SR.504.xx
8.2 RV head nozzle changer Issue 01/03 EN
84
8.2 RV head nozzle changer
8.2.1 Nozzle changer for 6-nozzle head
The nozzle changer for a 6-nozzle head was adapted for the SIPLACE HF machine as follows:
The magazines have now been rotated by 90 degrees. This enables 6 magazines to fit on a single
bar. The software has not changed apart from the rotation of the 6-nozzle magazines and the
change in coordinates that results from this. 8
8.2.2 Nozzle changer for 12–nozzle head
The nozzle changer for the 12-nozzle head now has 5 magazines. These are mounted in the same
horizontal orientation as before,
and in each sector, if no MTC is mounted. The nozzles can be defined for each magazine on the
SIPLACE Pro computer in the normal manner. 8