Maintenance Reference(CP45FV) Eng.pdf - 第56页
Samsung Component Placer CP45FV Series Maintenance Refer ence Caution Since the lubrication and grease appli cation for the machine is critical to the lifetime of the machine, ensure that periodical lubrication and greas…
Weekly Inspection
3-17
Reassemble the tray.
3.2.7.3. Gauge and Pressure Switch
Inspection
Check to see if the pressure switch has been automatically activated by low pressure.
To reduce pressure, turn the pressure regulating handle counterclockwise while
watching the pressure gauge located on the bottom right of the rear side of the
machine.
Pressure Gauge
Pressure Increase (+)
Clockwise
Pressure Decrease (-)
Counter clockwise
Pressure Regulating Handle
Upper Pressure
scale
Lower Pressure
scale
Solution
If the pressure switch does not work even when the pressure is reduced below the set
range (the area between green scales), contact our C/S company (STS) for after sales
service.
3.2.8. Connections and Fittings
Inspection
Check for unusual wear in the tubes.
Check to see if any tubes and fittings are loose, and make sure there are no leaks.
Solution
Replace the tube if unusual wear is discovered.
Tighten any loose fitting.
3.2.9. Lubrication and Grease Application
For details relating to the lubrication and grease application, refer to “4-1Lubricant
Method” (page 4-1).
Samsung Component Placer CP45FV Series Maintenance Reference
Caution
Since the lubrication and grease application for the
machine is critical to the lifetime of the machine, ensure
that periodical lubrication and grease application are
performed.
3-18
Lubricant Method
4-1
Chapter 4. Lubricant Method
4.1. Lubrication
Table 4-1. Table of Component Lubrication
Major Category Sub Category Lubricant Type Maker Method Period
L/M Guide
RE-Lubrication
SET MNW
Schneeberger
Grease
Gun
Every Four Months
Head
Ball Spline
ALVANIA
EP GREASE 2
SHELL
Apply
Grease
Every Three
Months
L/M Guide
Grease(EP2)
SHELL
Apply
Grease
Every Month
X-axis
Ball Screw
Grease(G-142K) Kanto Kasei
Apply
Grease
Every Month
Grease(EP2)
SHELL
Grease
Gun
Every Three
Months
L/M Guide
Grease(EP2)
SHELL
Apply
Grease
Every Month
Grease(G-142K)
Kanto Kasei
Grease
Gun
Every Three
Months
Y-axis
Ball Screw
Grease(G-142K)
Kanto Kasei
Apply
Grease
Every Month
Lead Screw
Grease(G-142K)
Kanto Kasei
Apply
Grease
Every Two Months
L/M Guide Rail
Grease(EP2)
SHELL
Apply
Grease
Every Six Months
Conveyor
Width
Adjustment
Chain
Grease(EP2)
SHELL
Apply
Grease
Every Years
Grease(EP2): Li Compl. soap grease no.2(SHELL).