Maintenance Reference(CP45FV) Eng.pdf - 第63页
Lubricant Method 4-7 L/M Guide Block L/M Guide Rail Coupling Figur e 4-3. Y -axis L/M Guide Solution Grease nipple Clean the rail of any contamination or dust, and apply grease if necessary . 4.2.2.3. X-axis Ball S…
Samsung Component Placer CP45FV Series Maintenance Guide
X-axis L/M Guide Rail & Bloc
k
Figure 4-2. X-axis L/M Guide Rail & Block
Solution
Clean any contamination or dust on the rail, and apply grease if necessary.
4.2.2.2. Y-axis L/M Guide Rail
Inspection
Check the rail for discoloration or dust.
Check the lubricants on the rails. Insufficient lubricants on the rails could cause
unusual noise during operation of the machine.
4-6
Lubricant Method
4-7
L/M Guide Block
L/M Guide Rail
Coupling
Figure 4-3. Y-axis L/M Guide
Solution
Grease nipple
Clean the rail of any contamination or dust, and apply grease if necessary.
4.2.2.3. X-axis Ball Screw
Inspection
Check the ball screw for discoloration or dust.
Check the lubricants on the ball screw. Insufficient lubricants on the rails could cause
unusual noise during operation of the machine.
Solution
Samsung Component Placer CP45FV Series Maintenance Guide
Clean the ball screw of any contamination or dust, and apply grease if necessary.
4.2.2.4. Y-axis Ball Screw
Inspection
Check the ball screw for discoloration or dust.
Check the lubricants on the ball screw. Insufficient lubricants on the rails could cause
unusual noise during operation of the machine.
Y-axis ball screw grease
Figure 4-4. Y axis ball screw grease nipple
Solution
Clean the ball screw of any contamination or dust, and apply grease if necessary.
Apply grease through the grease nipple.
4.2.3. Conveyor
4.2.3.1. Lead Screw for Adjusting Conveyor Width
Inspection
Look for components, dust or discoloration of the lead screw.
4-8