00197815-04_JC_PM_WF2_SX12_EN - 第13页
www.asm-smt.com Equipment required for Maintenance Workflow 2 SIPLACE SX1/2 Tools T08 03078706-xx Bitholder f. Screwdriver TorqueVario T01 - Vacuum cleaner T09 03073256-xx Extension/ straight TX20 T02 - Waste bin for noz…
www.asm-smt.com
u Attaching warning signs:
If a machine can be locked, it must be.
However, there are situations where energy isolating devices cannot accom-
modate locks. In these cases, the energy isolating devices must be tagged to
warn employees that the machine is de-energized for servicing. The tag or
label must be securely fastened, it must be placed in a position visible to all
and it may only be removed by the person who attached it.
u Release of stored energy:
Stored energy in the compressed air supply or electrical energy in electrolytic
capacitors must be released by appropriate means.
After switching off the machine, wait until the voltages and the compressed air
have discharged, so that work can be performed without any risk.
u Testing the lock out:
The lock can be easily tested by pressing the START button.
The following steps must be taken to restore the machine to operation.
u Check the working area. Authorized employees should remove all of their tools
and reinstall all safety features.
u Notify all affected employees.
u Before removing even one lock or tag, inform all workers in the affected area
that the machine is going to be restarted.
u Remove all locks/tags.
Every authorized employee must remove his own lock and shut it away.
u Turn the machine on. Make sure that authorized staff check the equipment in
operation to ensure that repairs were performed correctly
Testing
Service personnel may test circuits by energizing them briefly without suspending
the Lock Out / Tag Out Procedure. This may only be done when no other work is
being performed by any other person on the equipment being tested.
It is extremely important that all remote START switches be tagged with the "Do
Not Operate" tag to prevent inadvertent operation of the equipment during these
periods.
Responsibilities
• It shall be the responsibility of the maintenance and service personnel to make
sure this procedure is adhered to.
• It shall be the responsibility of the maintenance and service personnel's imme-
diate supervisor to instruct his personnel on this procedure.
• It shall be the responsibility of the Safety Officer with assistance from the
Safety Committee, Health Service Department, and the various managers and
vice-presidents to administer the Lock Out / Tag Out Procedure.
www.asm-smt.com
Equipment required for Maintenance Workflow 2 SIPLACE SX1/2
Tools T08 03078706-xx Bitholder f. Screwdriver TorqueVario
T01 - Vacuum cleaner T09 03073256-xx Extension/ straight TX20
T02 - Waste bin for nozzles T14 03080984-xx Protective cover CO sensor CPP
T03 00377393-xx Anti-static tweezers, Bernstein 5-192 T15 03080081-xx Torx Allen Wrench TX8
T13 03109304-xx Double wrenches size 17x19 T51 03078596-xx Protective Tubing BE-Sensor CP20
T18 00378524-xx Pocket scissors T62 03112729-xx Protective cover CO sensor CP20p
T20 - Flashlight T95 03156306-xx Protective cover CO sensor CP20 P2
Tool for head exchange if required Wear parts
T49 03020832-xx Packaging, C+P, plastics W01 03016831Sxx Nozzle magazine type 10xx
T58 03067127-xx Packing compl. / CPP W02 03066107-xx Nozzle magazine type 20xx
T85 03108670-xx Packaging CP20p cpl. W03 - Nozzle magazine with plastic nozzles 20xx/28xx
T87 03081725-xx Packing compl. pick+place-module W51 03085908Sxx Set X-Lubric. system SX1 (pack 10pc.)
T94 03162648-xx Packaging CP20 P2 cpl. W58 03101503-xx Nozzle magazine type 40xx/60xx
K01 - Head Exchange Kit W63 xx Nozzle magazine type 20xx/20
K01a 03109694-xx Head Exchange Kit for CPx Consumables
K01b 03109567-xx Head Exchange Kit option for CP20A C01 - Sheet of Paper 420x300
K01c 03114808-xx Head Exchange Kit option for CP20P C02 - Microfiber cloth
K01d 03109570-xx Head Exchange Kit option for CPP C03 03082092-xx Cleaning Wipe, KM-Wipe
K01e 03172724-xx Head Exchange Kit option for CP20P2 C04 00315253-xx SIPLACE cleaning-tissue
Included in head exchange kits C05 - Isopropanol
T04 03034148-xx Calibration jig, version SST23 C07 03079145Sxx lubrication system
T05 03010565-xx CALIBRATION PART VERSION 3 C31 00372972-xx Protective gloves latex
T07 03078400-xx Torque Screwdriver ESD 1,0-5,0 Nm
www.asm-smt.com
Head Exchange Kit - Overview