00197815-04_JC_PM_WF2_SX12_EN - 第26页
www.asm-smt.com
5 WF2 SX1/2 Clean the Z-Axis of the remaining C&P20x. 0.75 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T3, T20
Wear Part: Consumables:
www.asm-smt.com
1 Move all gantries to the end limit. 2 Area of the head to be cleaned. 3 Remove all components from the Z-Axis.
4 If OK -> next task.
www.asm-smt.com
6 WF2 SX1/2 Check and clean the X- and Y-Axis magnets. 1.5 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T3
Wear Part: Consumables:
C3
www.asm-smt.com
1 Move all gantries to the end limit. 2 Check all X-Axis magnets for contamina-
tion and damage.
3 Clean all X-Axis magnets.
4 Move the gantry to the other side. 5 Check all Y-Axis magnets for contamina-
tion and damage.
6 Clean all Y-Axis magnets.