00197815-04_JC_PM_WF2_SX12_EN - 第32页
www.asm-smt.com
7 WF2 SX1/2 Clean the X-Axis loose bearing, contact surface and scale and replace
the lubrication system.
2.75 min 3 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T11
Wear Part:
W51
Consumables:
C3, C4, C5, C31
www.asm-smt.com
13 Mount the protection cover (only with
CP20x).
14 Plug in the hose to the head (only with
C&P20x).
15 Remove the cloth.
16 Clean the X-axis scale over the entire
length.
17 Repeat all steps at the other gantry.
www.asm-smt.com
8 WF2 SX1/2 Clean the Y-Axis loose bearing, contact surface and scale and replace
the lubrication system.
2.75 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T13
Wear Part: Consumables:
C3, C5, C7, C31
www.asm-smt.com
1 Move all gantries to the end limit. 2 Unscrew the outer lubrication system at
the left side of the gantry.
3 Unscrew the inner lubrication system at
the left side of the gantry.
4 Clean the outer loose bearing at the left
side of gantry.
5 Clean the inner loose bearing at the right
side of gantry.
6 Clean the contact surface over the entire
length.