semi合集-English.pdf - 第2346页

SEMI E82-0705 © SEMI 1999, 2005 42 STEP COMMENTS HOST TSC COMMENTS 2. Alarm Report Acknowledge (ARA) S5,F2-> 3. <-S6,F11 Event Report Send (ERS) TransferPaused . CommandID 4. Event Report Acknowledge (ERA) S6,F12-&…

100%1 / 7923
SEMI E82-0705 © SEMI 1999, 2005 41
STEP COMMENTS HOST TSC COMMENTS
6. <-S6,F11 Event Report Send (ERS)
TransferAbort-Completed
. CommandID = “111111”
. CarrierLoc = “LOC1”
. TransferInfo
7. Event Report Acknowledge
(ERA)
S6,F12->
8. <-S6,F11 Event Report Send (ERS)
VehicleUnassigned
. VehicleID = “CARXX”
. CommandID = “111111”
9. Event Report Acknowledge
(ERA)
S6,F12->
10. The host will now initiate
another TRANSFER command
for the carrier(s) from
the TRANSFER command that
was aborted.
11. Enhanced Remote
Command(ERC)
TRANSFER
. COMMANDID = “111112”
. PRIORITY = 5
. REPLACE = 0
. TRANSFERINFO
1
- L,3
1. CARRIERID = “123456”
2. SOURCEPORT =
The current location of
the carrier as sent from
the TSC to the Host in the
TransferCompleted for the
failed TRANSFER command(an
example is a port on a
vehicle). The Host does
not have to know the
difference of whether the
carrier is still on the
car or not to send another
TRANSFER command.
3. DESTPORT = “PORTYY”
S2,F49->
12. <-S2,F50 Enhanced Remote Command
Acknowledge (ERCA)
13. Scenario will now follow
12.1.1
12.3.3 Unsuccessful Completion of a TRANSFER Command
12.3.3.1 The TSC must unsuccessfully complete a previously issued TRANSFER command due to an
unrecoverable transport system error. Although this scenario follows the GEM defined scenario for Alarm handling,
it was included to define the specifics of an IBSEM alarm and subsequent unsuccessful TRANSFER command
completion. The abort of TRANSFER command should be performed by host as described in ¶12.2.2.
STEP COMMENTS HOST TSC COMMENTS
1. <-S5,F1 Alarm Report Send (ARS)
Alarm Set
Unrecoverable Transport
System Error
. ALID
. ALTX
SEMI E82-0705 © SEMI 1999, 2005 42
STEP COMMENTS HOST TSC COMMENTS
2. Alarm Report Acknowledge
(ARA)
S5,F2->
3. <-S6,F11 Event Report Send (ERS)
TransferPaused
. CommandID
4. Event Report Acknowledge
(ERA)
S6,F12->
5. <-S6,F11 Event Report Send (ERS)
AlarmSet
. All VIDs necessary to
fully describe the nature
of the unrecoverable
error must be sent to the
Host in this event.
6. Event Report Acknowledge
(ERA)
S6,F12->
7. Human intervention is
necessary to clear the
unrecoverable error.
8. Note that the ResultCode
is crucial for the Host to
determine that the
TRANSFER command has
completed unsuccessfully.
It is equally important
that the current locations
of all carriers is sent to
the Host in the
unsuccessful completion
event.
<-S6,F11 Event Report Send (ERS)
TransferCompleted
. CommandName =
“TRANSFER”
. CommandID = “111111”
. Priority
. Replace
. ResultCode = Error
/*NonZero*/
. CarrierLoc = “LOC1”
. TransferInfo
9. Event Report Acknowledge
(ERA)
S6,F12->
10. <-S5,F1 Alarm Report Send (ARS)
Alarm Cleared
Unrecoverable Transport
System Error
. ALID
. ALTX
11. Alarm Report Acknowledge
(ARA)
S5,F2->
12. <-S6,F11 Event Report Send (ERS)
AlarmCleared
. All VIDs necessary to
fully describe the nature
of the unrecoverable
error must be sent to the
Host in this event.
13. Event Report Acknowledge
(ERA)
S6,F12->
SEMI E82-0705 © SEMI 1999, 2005 43
STEP COMMENTS HOST TSC COMMENTS
14. The host may now initiate
another TRANSFER command
for the carrier(s) from
the TRANSFER command that
was completed
unsuccessfully.
If there were multiple
carriers in the
unsuccessful TRANSFER then
the Host may elect to
issue one TRANSFER command
for all carriers or
individual TRANSFER
commands for each carrier.
The SOURCEPORT in the
resulting TRANSFER
command(s) may be an
internal vehicle location
or any other location
along the path of the
TRANSFER command.
12.3.4 Connection or Reconnection between TSC and Host
12.3.4.1 The Factory Host System crashes (or loses communication with the TSC for a time exceeding all time-outs
and retries) and must re-synchronize with the TSC in lieu of several events completing while the communication
link between the two was down.
STEP COMMENTS HOST TSC COMMENTS
1. Communication session between
host and TSC (re)established.
Host establishes
communication with the TSC
p
er the GEM standard scenario
(e.g., S1F13, etc).
2. Host Command Send (HCS)
PAUSE
S2,F41->
3. <-S2,F42 Host Command Acknowled
g
e
(HCA)
4. <-S6,F11 Event Report Send (ERS)
TSCPauseInitiated
5. Event Report Acknowledge
(ERA)
S6,F12->
6. <-S6,F11 Event Report Send (ERS)
TSCPauseCompleted
. CommandName = “PAUSE”
. ResultCode = 0
7. S6,F12->
8. Selected Equipment Status
Request (SSR)
. ActiveCarriers
. ActiveVehicles
. ActiveTransfers
S1,F3-> HOST asks for carrier
and vehicle information