semi合集-English.pdf - 第3039页

SEMI E122-0703 © SEMI 2003 20 Command Name Parameter Name Opt./R eq. Parameter Format Description SELECTEDSITELIST OPT List, s (s = # of test-sites) 1. (t est-site 1) 2. (t est-site 2) s. (tes t-site s) Provides single e…

100%1 / 7923
SEMI E122-0703 © SEMI 2003 19
13.5 Associated Remote Command Parameters
Table 8 Remote Commands
Command Name Parameter Name Opt./Req. Parameter Format Description
ABORT None
DISABLE-SITE DISABLESITELIST REQ List, s (s = # of test-sites)
1. (test-site 1)
2. (test-site 2)
s. (test-site s)
ID of test-site to be disabled.
ENABLE-SITE ENABLESITELIST REQ List, s (s = # of test-sites)
1. (test-site 1)
2. (test-site 2)
s. (test-site s)
ID of test-site to be enabled.
PAUSE None
DEFINEDSITELIST OPT List, s (s = # of test-sites)
1. (test-site 1)
2. (test-site 2)
s. (test-site s)
Establish the initial default set
of test-sites.
PROCESSPARAMETER OPT User specific
PP-SELECT
PROCESSPROGRAMID REQ Text Identifier of the process
program to be executed.
RESUME PROCESSPARAMETER OPT User specific
SEMI E122-0703 © SEMI 2003 20
Command Name Parameter Name Opt./Req. Parameter Format Description
SELECTEDSITELIST OPT List, s (s = # of test-sites)
1. (test-site 1)
2. (test-site 2)
s. (test-site s)
Provides single execution
override of test-sites
enabled/disabled by remote
commands ENABLE-SITE and
DISABLE-SITE.
DATALOGDATASETS OPT List, n (n - # of datasets)
1. List, 2
1. Dataset Name
1
2. List, p (Zero-length list
= all test-sites)
1. SiteID
11
…
p. SiteID
1p
n. List, 2
1. Dataset Name
n
2. List, q (Zero-length list
= all test-sites)
1. SiteID
n1
…
q. SiteID
nq
Datalog output can be directed
to separate datasets on a per-
test-site basis.
DATALOGBYTESTTYPE OPT List, b (b = # of (TestType,
TestStatus) pairs being
assigned reports.)
1. List, 3
1. TestType
1
2. TestStatus
1
3. ReportID
1
(If omitted,
the default report is assigned.)
…
b. List, 3
1. TestType
b
2. TestStatus
b
3. ReportID
b
Specifies datalog options by
general TestType.
DATALOGBYTESTID OPT List, c (c = # of (TestId,
TestStatus) pairs being
assigned reports.)
1. List, 3
1. TestID
1
2. TestStatus
1
3. ReportID
1
…
c. List, 3
1. TestID
c
2. TestStatus
c
3. ReportID
c
Specifies datalog options for
specific test ids.
DATALOGOPTION OPT Enumerated
(0:No Log, 1:Log Pass, 2:Log
Failures, 3: Log All)
Selects the condition when
datalog is sent.
START
DATALOGPLANNAME OPT Text Turns on datalogging according
to a predefined plan. This
parameter overrides all other
individual datalog setting
options in a START command.
SEMI E122-0703 © SEMI 2003 21
Command Name Parameter Name Opt./Req. Parameter Format Description
DATALOGPLANNAME REQ Text Name of datalog plan.
DATALOGDATASETS OPT List, n (n - # of datasets)
1. List, 2
1. Dataset Name
1
2. List, p (Zero-length list
= all test-sites)
1. SiteID
11
…
p. SiteID
1p
n. List, 2
1. Dataset Name
n
2. List, q (Zero-length list
= all test-sites)
1. SiteID
n1
…
q. SiteID
nq
Datalog output can be directed
to separate datasets on a per-
test-site basis.
DATALOGBYTESTTYPE OPT List, b (b = # of (TestType,
TestStatus) pairs being
assigned reports.)
1. List, 3
1. TestType
1
2. TestStatus
1
3. ReportID
1
(If omitted,
the default report is assigned.)
…
b. List, 3
1. TestType
b
2. TestStatus
b
3. ReportID
b
Specifies datalog options by
general TestType.
DATALOGBYTESTID OPT List, c (c = # of (TestId,
TestStatus) pairs being
assigned reports.)
1. List, 3
1. TestID
1
2. TestStatus
1
3. ReportID
1
…
c. List, 3
1. TestID
c
2. TestStatus
c
3. ReportID
c
Specifies datalog options for
specific test ids.
DEFINE-DATALOG-
PLAN
DATALOGOPTION OPT Enumerated
(0:No Log, 1:Log Pass, 2:Log
Failures, 3: Log All)
Selects the condition when
datalog is sent.
START EXEC None
STOP None
STOP EXEC None
13.6 Enable/Disable Site Hierarchy
13.6.1 Test-sites can be enabled and disabled either persistently or for a single execution of the process program
through the use of the PP-SELECT, ENABLE-SITE, DISABLE-SITE, and START remote commands. The
relationship hierarchy for these commands is as follows:
1. The ENABLE-SITE parameter on the PP-SELECT remote command establishes the initial default set of test-
sites.