semi合集-English.pdf - 第3054页

SEMI E122.1-0703 © SEMI 2003 9 Variable Name Description SECS-II Type Class Comments SoftwareVersion The version of this software list element. Multipl e instances of this variable exist. See SOFTWARE-LIST report. A[80] …

100%1 / 7923
SEMI E122.1-0703 © SEMI 2003 8
Variable Name Description SECS-II Type Class Comments
EnabledSites List of test-sites initially enabled at
process program download.
L, n
1. U4
2. U4
:
n. U4
SV n = # of enabled sites
EquipMake Tool Manufacturer. A[80] SV
EquipSerialID Unique Equipment identifier. A[80] SV
FunctionalResult Vector of bits indicating pass or fail
for each pin.
B DVVAL
HardBinID Test result hard-bin number. U4 DVVAL List by test-site.
HardBinName Test result hard-bin name. A[80] DVVAL List by HardBbinID.
HighLimit Higher limit for measurement.
Multiple instances of this variable
exist. See TEST-LIST report.
F4 DVVAL List by TestID.
LowLimit Lower limit for measurement.
Multiple instances of this variable
exist. See TEST-LIST report.
F4 DVVAL List by TestID.
NumberOfHeads The number of test-heads on the
system.
U4 SV
NumberOfPins The number of pins for each test-head. U4 SV
OperatorID Current Operator ID. A[80] ECV
Pass True if the test passed. BOOLEAN DVVAL Valid only in Datalog
reports.
PatternName This must identify the location to
which the vector address and cycle
count are relative.
A[80] DVVAL Valid only in Datalog
reports.
PinID Pin identifier used to identify the pin
results in pin result reports.
U4 DVVAL List by PinID.
PPExecVersion Test program version. A[80] SV
ProcessProgramID Process program identifier. A[80] SV
Range Range used by the measurement unit. F4 DVVAL Valid only in Datalog
reports.
RealResult Measured value. F4 DVVAL Valid only in Datalog
reports.
Signal Signal name. A[80] DVVAL List by PinID.
SiteID Test-board test-site number for multi-
site (parallel) testing.
U4 DVVAL
SoftBinID Test result soft-bin number. U4 DVVAL List by test-site.
SoftBinName Test result soft-bin name. A[80] DVVAL List by SoftBinID.
SoftwareBuildID The build ID of this software list
element. Multiple instances of this
variable exist. See
SOFTWARE-LIST report.
A[80] DVVAL
SoftwareName The name of this software list element
(e.g. Solaris, IG9000, etc.) Multiple
instances of this variable exist. See
SOFTWARE-LIST report.
A[80] DVVAL
SoftwareType The type of this software list element
(e.g. Operating System, Tool Control
System, etc.) Multiple instances of this
variable exist. See
SOFTWARE-LIST report.
A[80] DVVAL
SEMI E122.1-0703 © SEMI 2003 9
Variable Name Description SECS-II Type Class Comments
SoftwareVersion The version of this software list
element. Multiple instances of this
variable exist. See
SOFTWARE-LIST report.
A[80] DVVAL
StartTestPortID Start Test Source
(i.e. hand, keyboard, host).
A[80] DVVAL
TestBoardCalStatus Test-board calibration status. BOOLEAN SV
TestBoardID ID of current test-board. A[80] SV
TestBoardPosition A relative location of a test-site on a
test-board.
Size 2 array of U4 SV X and Y position. Site 1 is
0,0.
TestBoardSiteID A mapping of a test-site to a physical
location on the tester.
L, 3
1. SiteID
2. TestBoardID
3.
TestBoardPosition
SV
TestBoardStatus Test-board availability
(1 = enabled, 0 = disabled).
U4 SV List by test-site.
TestBoardType Type of fixture (test-board, probecard,
cable, contactor, etc.).
A[80] SV
TestHeadID The ID of the test-head. U4 SV
TestHeadStatus (2 = Not Available, 1 = enabled,
0 = disabled)
U4 SV
TestID Test identifier used to identify test
results. Multiple instances of this
variable exist. See TEST-LIST report.
U4 DVVAL
TestInstance Test instance identifier. The TestID
and TestInstance combined should be
unique for one execution of the test
p
rogram. They can be the same for all
results from units tested in parallel by
the same instance of a single test
(possibly different for a serially
applied test in a multi-site test
program).
U4 DVVAL Valid only in Datalog
reports.
TestName Test Name. Multiple instances of this
variable exist. See TEST-LIST report.
A[80] DVVAL List by TestID.
TestSetup Setup conditions used for the test.
Multiple instances of this variable
exist. See TEST-LIST report.
A[80] DVVAL List by TestID.
TestStatus Test status of a specific test in the test
program:
1 = Pass
2 = Fail
3 = Both
U4 DVVAL Valid only in Datalog
reports.
TestTime Test execution time in seconds. F4 DVVAL Valid only in Datalog
reports.
TestType 1 = Parametric Test (real value
result).
2 = Functional test (vector of
pass/fail results).
4 = Text test (arbitrary text string as
result).
Multiple instances of this variable
exist. See TEST-LIST report.
U4 DVVAL List by TestID.
SEMI E122.1-0703 © SEMI 2003 10
Variable Name Description SECS-II Type Class Comments
TextResult Arbitrary string of text. A[80] DVVAL Valid only in Datalog
reports.
UnitID Unit Serial Number. A[80] DVVAL List by test-site.
Units Electrical units to be measured.
Multiple instances of this variable
exist. See TEST-LIST report.
A[80] DVVAL
List by TestID.
VirtualConfig Current Virtual Configuration listing
all test-sites used.
L, 2
1.
TestBoardSiteID
2. TestHeadId
SV List by test-site.
NOTICE: SEMI makes no warranties or representations as to the suitability of the standards set forth herein for any
particular application. The determination of the suitability of the standard is solely the responsibility of the user.
Users are cautioned to refer to manufacturer' s instructions, product labels, product data sheets, and other relevant
literature, respecting any materials or equipment mentioned herein. These standards are subject to change without
notice.
By publication of this standard, Semiconductor Equipment and Materials International (SEMI) takes no position
respecting the validity of any patent rights or copyrights asserted in connection with any items mentioned in this
standard. Users of this standard are expressly advised that determination of any such patent rights or copyrights, and
the risk of infringement of such rights are entirely their own responsibility.